ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Hi8 Pro [GUIDE]HI8 PRO TWRP install & root

Follow Us

[GUIDE]HI8 PRO TWRP install & root

[Copy link]

klop8093|Post time:7-30-2016 01:32:08 View:35426|Reply:60

masslon| Post time 6-8-2016 02:19:46 | Show all posts

password is en.chuwi.com

Edited by masslon at 6-8-2016 02:56
ayusan replied at 6-7-2016 14:08
Perhaps , is the cause of the boot.img is older than the firmware that your are using.
You will need ...

Hi, i will try the new procedure.

I tried to access the link http://forum.chuwi.com/thread-1157-1-1.html, but is password protected.

what key should I enter?

Thanks.
Reply Support Not support

Use magic Report

Vedran| Post time 6-8-2016 02:53:37 | Show all posts
masslon replied at 6-8-2016 02:19
Hi, i will try the new procedure.

I tried to access the link http://forum.chuwi.com/thread-1157-1 ...

password is en.chuwi.com
Owner of miraculously revived Hi8 Pro ( PQ32G22151102244 )
Reply Support Not support

Use magic Report

masslon| Post time 6-8-2016 03:04:16 | Show all posts
Edited by masslon at 6-8-2016 04:33
Vedran replied at 6-8-2016 02:53
password is en.chuwi.com

Many thanks.

Sorry but I'm no expert and I need help.

When i digit commad "bootimg.exe --repack-bootimg" i have this result:

arguments: [cpiolist file]
cpiolist file: cpiolist.txt
output: ramdisk.cpio.gz
compress_level: 6
arguments: [base] [cmdline] [page_size] [padding_size]
kernel: kernel
ramdisk: ramdisk.cpio.gz
second:
dt_image:
Traceback (most recent call last):
  File "<string>", line 2205, in <module>
  File "<string>", line 1345, in repack_bootimg
TypeError: %x format: a number is required, not NoneType


It is normal on the last line "TypeError: %x format: a number is required, not NoneType" ?

Thanks

Reply Support Not support

Use magic Report

ayusan| Post time 6-8-2016 07:14:14 | Show all posts
Edited by ayusan at 6-8-2016 14:23
masslon replied at 6-8-2016 03:04
Many thanks.

Sorry but I'm no expert and I need help.

klop8093 has shared the new HI8PRO_20160505.zip.Thank you very much. >klop8093


Reply Support Not support

Use magic Report

iRONY| Post time 6-15-2016 04:16:03 | Show all posts
Confirm, work perfecty
Reply Support Not support

Use magic Report

DJJGG| Post time 6-15-2016 21:34:55 | Show all posts
Edited by DJJGG at 6-15-2016 23:56

newbie questions:
does this erase all partitions in dual os?
Does affect this to windows? differences between 2.8.6.0 and 3.0.1.0?there is an 3.0.2.0 ,sould i use this one instead?i have to install TWRP for root or i can just do only the second part?
do i have to do all again after a restart switch to windows or something?is only one time only and that's all?
Does it work fine?
i read in techtablets  after root the tablet enters in SOD http://techtablets.com/forum/topic/avoid-flashing-twrp-and-rooting/
Any possibility to see this on video?


Reply Support Not support

Use magic Report

DJJGG| Post time 6-17-2016 02:47:45 | Show all posts
no one can help me?
Reply Support Not support

Use magic Report

Vedran| Post time 6-17-2016 05:33:52 | Show all posts
All I know is, people are advising against this procedure: http://techtablets.com/forum/top ... oid-5-1/#post-41164

Owner of miraculously revived Hi8 Pro ( PQ32G22151102244 )
Reply Support Not support

Use magic Report

cleralb| Post time 7-21-2016 12:36:12 | Show all posts
After trying unsuccessfully other guides I found your ...
I can only thank you!!
Reply Support Not support

Use magic Report

dupajasia| Post time 7-30-2016 01:32:08 | Show all posts
I am unable to flash recovery, got this error:


  1. ***********************************************************************
  2. FASTBOOT TETHERED RECOVERY LAUNCHER 01-12-2015
  3. ***********************************************************************

  4. =======================================================================

  5. DEVICE STATUS: FASTBOOT-ONLINE

  6. DEVICE INFORMATION: Hi80PQ32G221605XXXXX fastboot

  7. =======================================================================

  8. copy needed files to our device
  9. target reported max download size of 268435456 bytes
  10. sending '/tmp/recovery.zip' (3477 KB)...
  11. OKAY [  0.253s]
  12. writing '/tmp/recovery.zip'...
  13. FAILED (remote: Prohibited command in verified state.)
  14. finished. total time: 0.335s
  15. target reported max download size of 268435456 bytes
  16. sending '/tmp/recovery.launcher' (469 KB)...
  17. OKAY [  0.146s]
  18. writing '/tmp/recovery.launcher'...
  19. FAILED (remote: Prohibited command in verified state.)
  20. finished. total time: 0.230s
  21. target reported max download size of 268435456 bytes
  22. sending '/sbin/partlink' (158 KB)...
  23. OKAY [  0.147s]
  24. writing '/sbin/partlink'...
  25. FAILED (remote: Prohibited command in verified state.)
  26. finished. total time: 0.227s

  27. issue fastboot oem "stop_partitioning"  command to start cwm recovery:
  28. ...
  29. FAILED (remote: unknown command 'oem stop_partitioning')
  30. finished. total time: 0.023s
Copy the Code
Reply Support 1 Not support 0

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list