ChuWi Forum»Forum Chuwi Download Tutorial How to flash Bios using USB disk

Follow Us

[Other] How to flash Bios using USB disk

[Copy link]

emily|Post time:7-3-2016 13:09:10 View:22422|Reply:56

nuzen| Post time 6-5-2016 18:13:41 | Show all posts
OMG  It's working again.  I read your posts DigitalMD and NickM.  THANK YOU again.

My HiBook had sat for over one day, plugged in mostly.  I started holding in the power button to bring it to the DNX FASTBOOT screen again, and it started booting, the screen went on and off a few times, then   the dual boot screen came up like normal.
(emily, it's ok now).

My Hibook is working now.  The BIOS wasn't corrupted after all.
I still have a separate, small microSD card problem, but I'll do a separate post for that and end with a happy note here, and thanks to DigitalMD, NickM, and emily.

Peace and good,
Joe, aka nuzen
Reply Support Not support

Use magic Report

moviebuff12| Post time 6-10-2016 08:34:57 | Show all posts
Well did the flashing Bios on my Hibook and got the x64 error not found then has the dnx fastboot come up but then it powered off and i'm unalbe to turn on again. Nothing happens when I hold my power button down. Is this device bricked now... geez first i keep getting the tablet shutting off when it goes into windows and tried updating Bios to see if it might fix and now the tablet doesn't turn on at all. Any help would be appreciated
Reply Support Not support

Use magic Report

DigitalMD| Post time 6-10-2016 10:34:39 | Show all posts
moviebuff12 replied at 6-10-2016 11:34
Well did the flashing Bios on my Hibook and got the x64 error not found then has the dnx fastboot co ...

Hold the power button down for 30 seconds, then set the device down and don't touch it for 3 minutes, Then power on as normal.
Reply Support Not support

Use magic Report

moviebuff12| Post time 6-10-2016 18:23:33 | Show all posts
Thanks DMD, I got it back I hit the power button 3 times in a row then reflashed the bios. Atm (hold breath) the Hibook isn't shutting down in Windows either.
Appreciate the help
Reply Support Not support

Use magic Report

gonature| Post time 6-21-2016 22:37:59 | Show all posts
eustaquio replied at 5-27-2016 18:05
I tried to upgrade my new Chuwi Hi12 Dual OS firmware today, following carefully all the given steps ...

Hi,

Yesterday I  upgrade the BIOS and come the same mistake.
I finished the prompt with "exit". (Move keyboard before). After restarting everything was o.k.

What does the error?
If the BIOS is now completely updated?
Reply Support Not support

Use magic Report

Shmulik| Post time 6-25-2016 02:07:11 | Show all posts
Edited by Shmulik at 6-25-2016 05:40

I have Vi10 pro serial: Vi10PQ64G22151001140. Dual OS.
My current Bios is: J1D_S165C_206.

I'm trying to install the new Bios. When I press the power button and F7 the device just boots. I tried continues or repeatedly hit of F7. The same appends, the Tablet just boots.

What should I do?

Reply Support Not support

Use magic Report

dave.m| Post time 6-29-2016 08:06:38 | Show all posts
Hi.
Is it possible to get iso file with your version of android for this device?
Reply Support Not support

Use magic Report

emily| Post time 6-29-2016 18:44:49 | Show all posts
dave.m replied at 6-29-2016 08:06
Hi.
Is it possible to get iso file with your version of android for this device?

Which device do you have?

Please download official files from here:
http://forum.chuwi.com/forum-83-1.html

Official tutorial:
http://forum.chuwi.com/forum-84-1.html
Reply Support Not support

Use magic Report

supportteam5| Post time 6-30-2016 19:13:05 | Show all posts
hi emily, we hv the chuwi hi10 with serial no. q64g42160502881, i download the bios from your link and try to flash the bios, but got an error msg "Error: requested Rom Hole not available in ROM file".
Reply Support Not support

Use magic Report

KarelC| Post time 7-3-2016 13:09:10 | Show all posts
Hi Emily, I have the same problem: hv the chuwi hi10 with serial no. q64g42160400738, i download the bios from your link and try to flash the bios for dual boot, but got an error msg "Error: requested Rom Hole not available in ROM file".
Can You help Us? many thx.
Reply Support 0 Not support 1

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list