Notice: The battery level should be more than 50% before reinstalling the system.|
8GB USB Flash Disk, USB-OTG Cable, HUB (3 ports) and the USB keyboard as follows:
The First Step:
Please format the USB flash disk as follows:
【NTFS format, Named with WINPE】
format the USB flash disk into the format with "NTFS" and name it as "WINPE". (If you don’t name the U disk with WINPE, the device can’t find your U disk)
Please unrar the file "HiBook Windows.rar " as follows:
(Close the antivirus software before unzipping the image files to avoid the apps in files that are deleted.)
Open the floder of the Chuwi HiBook windows 10 image
Copy all the sub-files (8 files) to the root directory of the USB flash disk.
The Second Step:
The tablet connects Hub. Put the USB flash disk into the Hub, and then plug the Hub into keyboard. Make sure that the tablet in off mode. Please press the power button of the tablet. At the same time, click “F7” key of the keyboard continuously to enter the boot mode.
Choose UEFI: Sandisk U1tra PMAP, Partoton 1, click “enter”to program.
When the programming is finished, the tablet will shut off automatically.
The programming will last about 5 to 10 minutes; the precise time is dependent of Hub and U disk. The introduction is on basis of using the U disk 3.0. The programming lasts about 5 minutes.
Download HiBook Windows: