ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Vi8 Plus My tablet not booting after windows reset.

Follow Us

My tablet not booting after windows reset.

[Copy link]

GaminGEvolveD|Post time:12-10-2016 09:05:55 View:785|Reply:3

I tried to reset windows like delete all files and open new windows. I select that option in windows and wait to do that till %100 but after it may tablet not booting anymore.
Later tried to install another w10 with flash but not worked. Any solutions?
Reply

Use magic Report

ian| Post time 11-30-2016 00:31:39 From the mobile phone | Show all posts
Edited by ian at 11-30-2016 00:34

The official win10 that chuwi provided for your device is a custom windows 10. And they prevent the user from making any changes which includes  resetting your device.. Since you cant boot anymore, the only way you can do is to have a fresh install of the official win 10 emily provided...
Reply Support Not support

Use magic Report

hombreolo| Post time 12-6-2016 13:47:11 | Show all posts
See if you can help
Try to put the factory values from windows 10 and half was an error and now does not boot windows 10, android yes

I downloaded everything related to the installation of win 10 (forum chuwi official) and I have followed all the steps
1- I created with ultraiso (and with rufus) (type of partition Gpt for uefi) boot usb (fat 32) with the file downloaded from the explanation (pan.badui)
2- I copied the 8 files in the root of the usb
3- I connect the keyboard and the usb to the tablet
4- I enter the bios (f7) and select the usb

But it jumps to the selection screen of android or windows, it does not boot from the usb
Can not star with usb

Thanks in advance and forgive the inconvenience
Reply Support Not support

Use magic Report

ian| Post time 12-10-2016 09:05:55 | Show all posts
Edited by ian at 12-10-2016 09:09
hombreolo replied at 12-6-2016 13:47
See if you can help
Try to put the factory values from windows 10 and half was an error and now does ...

try this.
open cmd as admin
type the following one by one.

diskmgmt.msc   --->leave the disk management open.

diskpart  (press enter)
list disk (press enter)

----->>> go back to disk management and see what disk # assigned to your pendrive.
---->>> lets assume disk # 1

select disk 1 (press enter)
clean (press enter)
create partition primary (press enter)
format quick fs=fat32 label=WinPE (IT SHOULD BE WINPE: ...press enter)
assign (press enter)
active (press enter)

exit (press enter)

now copy/extract the official firmware for your device to your pendrive
do not create any folder on your own, just extract it directly to your usb pendrive.

insert your usb to your device..
from here i pressume you know what to do next..

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list