Edited by emily at 7-27-2017 19:51 |
How to flash Android for Chuwi Hi8 Pro
This method is for all Cherry Trail Z8300 tablets, such as Hi8pro (Dual Boot version), Hi10, Hi12,HiBook, Vi8 plus, vi10 ultimate,etc.
1. Install Android Programming Tool "PhoneFlashTool";
2. Open the Android Programming Tool to flash Android for Hi8 Pro following these steps below:
Click "Browse" to choose the Android Firmware file
To choose "flash.json" will erase Windows. After flashing Android, you have to reinstall Windows again;
To choose "flash-no-erase-all.json" will not erase Windows;
When the "flash.json" or "flash-no-erase-all.json" is chosen successfully, please long press Volume "+“, Volume ”-” and power button.
Firstly long press Volume “+” and “-”key in shutdown condition. At the same time, long press power button until the led light become yellow. Long press Volume "+" and Volume "-" key until the yellow english words "DNX FASTBOOT MOOE.." show in the middle of the screen.
Then connect tablet and computer using date cable (one port for USB port of the computer, another port for Type-C USB of the tablet)；
When tablet is connected sucessfully, The blue button "Start to flash" will be shown.
Then clicking blue button “Start to flash” will start to flash.
When the process become 100% and show green, you can pull out the tablet.
PS: To flash tablet is risky, if your tablet has no problem, please don't try to flash your tablet.
https://mega.nz/#!49wXiDSY!4cGlN ... 2SZShTYdpeJMojiZWJk