ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi HiBook Pro Touchscreen lag on Windows 10?|SOLVED

Follow Us

Touchscreen lag on Windows 10?|SOLVED

[Copy link]

fuldei|Post time:11-29-2016 11:12:01 View:2169|Reply:21

AndiIsl| Post time 10-30-2016 05:10:53 | Show all posts
How? The Tablet has only 4 screws.
Reply

Use magic Report

fuldei| Post time 10-30-2016 07:45:04 | Show all posts
I mean display.
Reply

Use magic Report

AndiIsl| Post time 10-31-2016 04:59:06 | Show all posts
The display is not screwed. The display is completely glued
Reply

Use magic Report

fuldei| Post time 11-13-2016 10:45:17 | Show all posts
Flash the BIOS!
Windu rearranged is not necessary. In my case it was not necessary. And data from the two axes are not affected. Bios downloaded https://www.dropbox.com/s/hux34k ... _C109K.234.zip?dl=0 password to download en.chuwi.com
Reply

Use magic Report

AndiIsl| Post time 11-14-2016 08:41:52 | Show all posts
OMG. AMAZING!!

Do you have a how to tutorial for flashing the bios?

many thanks i check this later!!
Reply

Use magic Report

AndiIsl| Post time 11-15-2016 06:48:04 | Show all posts
Edited by AndiIsl at 11-15-2016 06:53

I found the mistake and now i have a solution!!

Step 1:

Download this: https://www.dropbox.com/s/hux34k ... _C109K.234.zip?dl=0 NO PASSWORD REQUIRED!!

Step 2:

Format your USB Stick (2.0,3.0) (minimum 512 Mb) to FAT32 and name it WINPE <-- (I don't know if that is that required)

Step 3:

Unzip the *.zip into the root directory from you Fresh USB Stick.

Step 4:

Shut down your CHUWI HiBook Pro. Turn it on and press the F7 key until the Boot Menu comes. With the UP and Down key you can choose the USB stick (the one with UEFI in the name) and Press ENTER.

Step 5:

After that it Flashs your BIOS automatically.

IF NOT

Step 6:

Do you have an courser that blinks extremly fast?

Press ESC. Then type: fs5: and press ENTER. And then type: fpt64.efi -f bios.bin

after a few minutes it ends and you see the command prompt. Type: reset After that you are done and your CHUWI HiBook Pro should boot up and works just fine!

Many thanks to fuldei!!

Before: issue.jpg

And After: Unbenannt.JPG
Reply

Use magic Report

Domcat| Post time 11-17-2016 08:26:40 | Show all posts
Hello andilsl.
So just fashing the BIOS 234 solved the problem?
What do you mean when you say "found the mistake"?
My hibook pro has already the BIOS version 234, but I've the touch screen problem.
Do you think reflashing may help?

Thanks
Reply

Use magic Report

AndiIsl| Post time 11-19-2016 15:05:57 | Show all posts
with that i mean that i found a solution to fix the problem (touch issue).

Yes you see in your BIOS you have the "version 234" but that says you need a update with the number 234.

Just update the BIOS. I promise you after that your touch screen works just fine.
Reply

Use magic Report

MR-HiTMan| Post time 11-28-2016 11:04:26 | Show all posts
AndiIsl replied at 11-19-2016 15:05
with that i mean that i found a solution to fix the problem (touch issue).

Yes you see in your BIO ...

thanks a lot i just get the tablet from a day ago and i was this problem and i was have the same BIOS "version 234" so i think my tablet it updated but when i compare it with your source i found there are problem and in my BIOS source .

so when i flash your source in my tablet everything working good as u say

so any one if he have the same problem just download this BIOS Source here and flash it as the way that you explain it and the tablet will work with u without any problem in touch screen

thanks

Reply

Use magic Report

Domcat| Post time 11-29-2016 11:12:01 From the mobile phone | Show all posts
Confirmed... Touch screen issue solved with BIOS 234. Thank Andilsl
Reply

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list