Hi10 PRO HQ64 : Charging problem - Only in Windows - Chuwi Hi10 - ChuWi Forum - Forum.chuwi.com
ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Hi10 Hi10 PRO HQ64 : Charging problem - Only in Windows

Follow Us

Hi10 PRO HQ64 : Charging problem - Only in Windows

[Copy link]

larmaanidis|Post time:3-19-2017 02:49:46 View:831|Reply:3

My tablet is charging until 95% and after is really struggling to continue until 100% or -the most of times- it stops at 95%~97% and after stuck there.Even if it will go 100% fully charged after a while it starts losing power -always been connected to charger- and showing -plugged in,not charging- . For example,i shut it off,i keep it on charger,i start it up and i see it is 100% battery.With the charger always connected,after a while i see the power level is 99% and keep falling 98%,97%,96% and so on.After,If i unplug and plug again the charger for example at a 82% it starts charging again until 95%~97% and again stops and starts lossing battery power again. I have this problem only in windows, in android i have no problem it goes normally at 100% and stays there. I tried different chargers and cables but no luck. The tablet is stock, i didn't install any 3rd part program, i have NOT install any battery monitoring or any other program, just stock as i bought is. Is this a driver issue? My Intel(R) Battery Management Device driver is 04/15/2016,604.10586.3086.14859 .
Any help please?
Reply

Use magic Report

deejay1963| Post time 3-17-2017 09:12:46 From the mobile phone | Show all posts
Windows generally stops charging at 95 % levels. It is by design in windows. This is done for safety reasons and prevent battery overheating and overcharging . Since windows does not know the charging chip used it uses 95% charging level  as default and stops the charging process. You have nothing to worry.
Reply Support Not support

Use magic Report

Hackerjac| Post time 3-17-2017 09:43:50 | Show all posts
deejay1963 replied at 3-17-2017 18:12
Windows generally stops charging at 95 % levels. It is by design in windows. This is done for safety ...

Nice to know, thought it was one of the many "its a known problem"
I do NOT work for Chuwi. Please DO NOT pm or email me with problems you may have!
Reply Support Not support

Use magic Report

Vamire| Post time 3-19-2017 02:49:46 | Show all posts
deejay1963 replied at 3-17-2017 09:12
Windows generally stops charging at 95 % levels. It is by design in windows. This is done for safety ...

But if you can read his post you will understand that is not working like this for him. Not even on my tablet.
It dosent stops at 95% but it continues to charging at 100% AND THEN it stops charging!! This is not safe and it should not working like this!!
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list