touch screen vi8 plus/ new windows - page 6 - Chuwi Vi8 Plus - ChuWi Forum - Forum.chuwi.com
ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Vi8 Plus touch screen vi8 plus/ new windows

Follow Us

touch screen vi8 plus/ new windows

[Copy link]

Ahmedk218|Post time:6-28-2017 11:29:19 View:1008|Reply:74

Motobot| Post time 6-28-2017 08:43:21 | Show all posts
Done!
Replace main.cmd with this modified one and try again to flash Windows.
Good luck!

Main_modified.zip

3.16 KB, Downloads: 2

Reply Support Not support

Use magic Report

Ahmedk218| Post time 6-28-2017 08:51:54 | Show all posts
Motobot replied at 6-28-2017 08:43
Done!
Replace main.cmd with this modified one and try again to flash Windows.
Good luck!

i did remove the old Main.cmd
and paste the new one in the flash drive(WINPE) in Scripts forlder

it didnt work
same error
Reply Support Not support

Use magic Report

Motobot| Post time 6-28-2017 08:58:13 | Show all posts
after the clean and i try to restart the tablet, same error
You should not restart.
You should enter startnet.cmd in command line and press Enter to continue reinstalling windows.
Reply Support Not support

Use magic Report

Ahmedk218| Post time 6-28-2017 09:05:52 | Show all posts
after the clean i did enter the startnet.cmd got the error

i will point you something in the script it select the disk1 and the disk 1 is 0mb
it should select the disk0 i think the 28gb!

_DSC0712.jpg
Reply Support Not support

Use magic Report

Motobot| Post time 6-28-2017 10:07:37 | Show all posts
Edited by Motobot at 6-28-2017 21:10

OK Ahmed
Let's try to play with the line
set disk=
1. Right click on the modified Main.cmd and select Edit.
2. Find the line set disk=
3. Set 1 or 0
It should looks like this:
set disk=1
or
set disk=0
One of these must work I hope.
Reply Support Not support

Use magic Report

Motobot| Post time 6-28-2017 10:17:38 | Show all posts
Edited by Motobot at 6-28-2017 21:19

Especially pay attention to the volume label of youe flash drive. It must be WINPECheck it again
Reply Support Not support

Use magic Report

Ahmedk218| Post time 6-28-2017 10:28:21 | Show all posts
WINPE it is
qqqqqqqqq.jpg
Reply

Use magic Report

Motobot| Post time 6-28-2017 10:50:50 | Show all posts
What about set disk= ?
Reply Support Not support

Use magic Report

Ahmedk218| Post time 6-28-2017 11:07:09 | Show all posts
in line 42
i set it to
set disk=1
and i try to set it to
set disk=0

nothing changed
Reply Support Not support

Use magic Report

Motobot| Post time 6-28-2017 11:29:19 | Show all posts
Ahmed,
What do think about WinNTSetup? Do you want to use this method of installing the system?
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list