ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Hi10 Plus Hi10 Plus Screen flickers in Win10 while tablet is c ...

Follow Us

Hi10 Plus Screen flickers in Win10 while tablet is charged

[Copy link]

tffak|Post time:7-3-2017 04:16:13 View:231|Reply:15

emily| Post time 6-29-2017 23:28:59 | Show all posts
Edited by emily at 6-29-2017 23:37
mimble replied at 6-29-2017 23:00
No. He has not solved his problem in the video. Watch it again. He shows the problem with three di ...

hello, he solve his problem, please read his video comment as follows:
the only thing that helped was to buy a quality wall charger and cable:
https://www.banggood.com/Qualcom ... .html?rmmds=myorder
and
https://www.banggood.com/BlitzWo ... .html?rmmds=myorder
Also, change the bios settings:
"Enter the bios by pressing delete when you sart up your machine
move the arrows to advanced press enter
enter system components
change S5 charging driver and S5 LPM settings to enable
save and exit.
Plug your charger in to your machine and turn it on.
It charges very slowly when switched on, but does not flash or lose power. Charges as normal when turned off."
then you have to turn off, plug in ,then boot to windows and it will charge flawlessly

Reply Support Not support

Use magic Report

emily| Post time 6-29-2017 23:35:38 | Show all posts
mimble replied at 6-29-2017 23:00
No. He has not solved his problem in the video. Watch it again. He shows the problem with three di ...

hello, mimble, he solve his problem in the video comment, please check it as follows:
the only thing that helped was to buy a quality wall charger and cable:
https://www.banggood.com/Qualcom ... .html?rmmds=myorder
and
https://www.banggood.com/BlitzWo ... .html?rmmds=myorder
Also, change the bios settings:
"Enter the bios by pressing delete when you sart up your machine
move the arrows to advanced press enter
enter system components
change S5 charging driver and S5 LPM settings to enable
save and exit.
Plug your charger in to your machine and turn it on.
It charges very slowly when switched on, but does not flash or lose power. Charges as normal when turned off."
then you have to turn off, plug in ,then boot to windows and it will charge flawlessly
could you please try it in this way?
Reply Support Not support

Use magic Report

mimble| Post time 6-30-2017 07:59:19 | Show all posts

RE: Hi10 Plus Screen flickers in Win10 while tablet is charged

emily replied at 6-29-2017 23:35
hello, mimble, he solve his problem in the video comment, please check it as follows:
the only thi ...
Also, change the bios settings:

The bios settings make no difference.
If you read the documentation, S5 refers to powering USB ports when in a power saving mode.

Yes. Like all the other people, I did try many chargers. I even tried a different brand which can deliver up to 3 amps.
None of this helps.
Reply Support Not support

Use magic Report

charleskoz| Post time 7-2-2017 11:47:02 | Show all posts
I've seen this happen when the cable is not plugged all the way in. The port is not well designed and it is easy to do it incorrectly, you must push it all the way in until you feel a light "snap" as it lodges into place.
Reply Support Not support

Use magic Report

ventel| Post time 7-3-2017 02:55:22 | Show all posts
charleskoz replied at 7-2-2017 11:47
I've seen this happen when the cable is not plugged all the way in. The port is not well designed an ...

Is that what the problem is in this person's videos ?
https://youtu.be/JKJ5EFtDEhk
and https://www.youtube.com/watch?v=-wJNMl0TAqs
Reply Support Not support

Use magic Report

manonegra222| Post time 7-3-2017 04:16:13 | Show all posts
Edited by manonegra222 at 7-3-2017 13:17
charleskoz replied at 7-2-2017 20:47
I've seen this happen when the cable is not plugged all the way in. The port is not well designed an ...

We look transparent. The problem is exactly that and there is no bios, hardware or software problem.

But if they do not want to hear they keep spinning.

When they decide to cut a little the plastic of the connector type C solve the problem.
The battery charges well on Android but not on Windowsm, but the problem is the depth of the port.
Chuwi Moderator
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

12
Return to list
Quick Reply To Top Return to the list