ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Hi10 Touch screen doesn't work

Follow Us

Touch screen doesn't work

[Copy link]

idoshamriz|Post time:8-4-2017 03:55:40 View:447|Reply:13

Hey!

I updated my tablet to a clean installation of Windows. Since than I am trying to make my touchscreen to work but it doesn't. I have tried every single driver of KMDF HID Minidriver for Touch I2C Device and the best case I have managed to reach to was that the press on the screen is on the right place of where I have pressed, however a single press is indicated as a long press. The tablet is not usable with touch.

I do think that it is a driver issue.

Did anyone faced this problem? I could really use some help

Thanks
Reply

Use magic Report

byzeta| Post time 8-3-2017 15:13:39 | Show all posts
Have you tried with these drivers and the official image of Chuwi?
http://forum.chuwi.com/forum.php ... typeid%26typeid%3D1
Reply Support Not support

Use magic Report

manonegra222| Post time 8-3-2017 15:18:20 | Show all posts
Download the driver for this link:

https://1drv.ms/f/s!AqpKvT8-VB_8qXJckeF2QL1mUAFl
Chuwi Moderator
Reply Support Not support

Use magic Report

idoshamriz| Post time 8-3-2017 21:43:56 | Show all posts
manonegra222 replied at 8-3-2017 15:18
Download the driver for this link:

https://1drv.ms/f/s!AqpKvT8-VB_8qXJckeF2QL1mUAFl

It doesn't work There are random touches and touches in wrong places
Any other idea?
Reply Support Not support

Use magic Report

idoshamriz| Post time 8-3-2017 21:51:20 | Show all posts
manonegra222 replied at 8-3-2017 15:18
Download the driver for this link:

https://1drv.ms/f/s!AqpKvT8-VB_8qXJckeF2QL1mUAFl

It doesn't work There are random touches and touches in wrong places
Any other idea?
Reply Support Not support

Use magic Report

manonegra222| Post time 8-3-2017 22:08:43 | Show all posts
idoshamriz replied at 8-4-2017 06:51
It doesn't work  There are random touches and touches in wrong places
Any other idea?

You mean that, without touching the screen, random touches occur, or that if you touch one point, it is marked in another?
Chuwi Moderator
Reply Support Not support

Use magic Report

idoshamriz| Post time 8-3-2017 22:29:08 | Show all posts
manonegra222 replied at 8-3-2017 22:08
You mean that, without touching the screen, random touches occur, or that if you touch one point,  ...

I touch one point and it marks another. It also marks it as mouse right click instead of normal pressing. I have tried a lot of drivers and in the best I could find it marked the same spot I pressed on but it marked as mouse right click instead of normal one
Reply Support Not support

Use magic Report

idoshamriz| Post time 8-3-2017 22:31:51 | Show all posts
byzeta replied at 8-3-2017 15:13
Have you tried with these drivers and the official image of Chuwi?
http://forum.chuwi.com/forum.php? ...

Yes I did, unfortunately it didn't work
Reply Support Not support

Use magic Report

manonegra222| Post time 8-3-2017 23:08:09 From the mobile phone | Show all posts
If you have found a controller that correctly positions the points you mark with the touch, install it. You can go later to configure the mouse, exchanging the right and left buttons
Reply Support Not support

Use magic Report

idoshamriz| Post time 8-4-2017 03:55:40 | Show all posts
manonegra222 replied at 8-3-2017 23:08
If you have found a controller that correctly positions the points you mark with the touch, install  ...

But in this case it ruins my mouse and touchpad

Besides, it doesn't work as well
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

12Next
Return to list
Quick Reply To Top Return to the list