ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Hi10 Hi10 Pro Replacement Glass

Follow Us

Hi10 Pro Replacement Glass

[Copy link]

TheFifth|Post time:12-29-2017 08:15:35 View:120|Reply:2

Edited by TheFifth at 12-23-2017 05:42

I've dropped my Hi10 Pro and cracked the glass.  I've looked around and it seems that replacement glass and digitizers are available, however there are a few different model numbers out there.

My Hi10 Pro model starts HQ64G. Does anyone know which model of glass+digitizer I need to buy?


I've found these two versions.  They both say they are for the same model of Hi10 Pro, but the price is very different.  Anyone know what the difference is? ... :g:29MAAOSwyGZaONwo ... :g:vGAAAOSwevlaONqY


Use magic Report

manonegra222| Post time 12-23-2017 07:00:03 | Show all posts
To be completely sure of the touch you need for your tablet you should check the reference that appears on the broken touch connection flex. This way you will have the assurance that it is the same model.
You can also contact where they can indicate the model you need and get the replacement.
If you need help with the replacement, you can see some of the videos on youtube that detail the whole process:
Chuwi Moderator
Reply Support Not support

Use magic Report

TheFifth| Post time 12-29-2017 08:15:35 | Show all posts
Edited by TheFifth at 12-29-2017 08:25

Thanks for the info.  I've checked the cable and there is no model number printed on it.  I've looked at examples online to see where the part number is and it's definitely not printed in the same place on my cable.  In fact there are no numbers on the cable at all.

The IC chip has the following numbers:


I can't find any listings that match those particular numbers though.

I'll give Chuwi support a go.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list