ChuWi Forum»Forum Chuwi Download Official Firmware [Official Version][Dualboot] Chuwi Hi8 Pro Windows + ...

Follow Us

[Hi8 Pro] [Official Version][Dualboot] Chuwi Hi8 Pro Windows + Android + Bios + driver

  [Copy link]

emily|Post time:3-10-2018 03:02:38 View:242611|Reply:788

emily| Post time 1-28-2018 17:51:02 | Show all posts
javita replied at 1-27-2018 01:51
Hello emily!

Where can I download original Windows firmware for Dualboot Hi8 Pro serial number PQ32 ...

hello, here is the windows, please check it:
http://www.mediafire.com/file/y9 ... in10_Euro.part1.rar
http://www.mediafire.com/file/1v ... in10_Euro.part2.rar
http://www.mediafire.com/file/7w ... in10_Euro.part3.rar
Reply Support Not support

Use magic Report

gx3k| Post time 2-3-2018 11:03:48 | Show all posts
Edited by gx3k at 2-3-2018 11:27

My Hi8 pro had an update that required an external drive and was not able to complete the operation and will not boot to Windows. I tried flashing Windows following the instructions from another thread and it gives the error 'Failed to make w:\recycler\scratch directory' and fails. Any help? Thanks.

Model: Hi8 PQ32G22160400798
Reply Support Not support

Use magic Report

Motobot| Post time 2-3-2018 11:33:39 | Show all posts
gx3k replied at 2-3-2018 22:03
My Hi8 pro had an update that required an external drive and was not able to complete the operation  ...

Hello gx3k,
The volume label of your flash drive must strictly comply with the instructions. It must be WINPE.
Reply Support Not support

Use magic Report

MelissaShenker| Post time 2-3-2018 13:03:32 | Show all posts

Posting again...

I have PQ32G221705xxxxx. I have problems with SD card.

You gave me this BIOS:
http://www.mediafire.com/file/hz ... o_20170502_BIOS.rar

I flashed it but it still says SD card still does not work. Please help
Reply Support Not support

Use magic Report

Motobot| Post time 2-3-2018 14:09:12 | Show all posts
MelissaShenker replied at 2-4-2018 00:03
Posting again...

I have PQ32G221705xxxxx. I have problems with SD card.

Hello MelissaShenker,
Unfortunately, you can't revive what has died. Resign yourself to the loss and continue to live peacefully and happily. This is not a joke.
Someone should have told you the truth.
Good Luck!
Reply Support Not support

Use magic Report

MelissaShenker| Post time 2-4-2018 00:04:31 | Show all posts
Motobot replied at 2-3-2018 14:09
Hello MelissaShenker,
Unfortunately, you can't revive what has died. Resign yourself to the loss a ...

So how do I invoke my warranty? ANy chance of getting my money back or at least a replacement tablet?
Reply Support Not support

Use magic Report

Motobot| Post time 2-4-2018 08:09:08 | Show all posts
MelissaShenker replied at 2-4-2018 11:04
So how do I invoke my warranty? ANy chance of getting my money back or at least a replacement tabl ...

Dear Melissa,
In this case, you should assess your chances of a favorable outcome. Honestly, I think that you should not waste your time and extra money. I can only repeat what was said before.
If you are determined to invoke your warranty, then you should contact the seller first.
Reply Support Not support

Use magic Report

thaayb| Post time 2-17-2018 08:37:59 | Show all posts
thaayb replied at 1-3-2018 21:05
Dear chuwi team, dear emily!

I have following problem with my brand new chuwi hi 8 pro tablet (PQ32 ...

I finally found the fucking problem. It was an hardware issue!! The rtl8723BS board was not properly soldered to the mainboard. especially pin12 - pin22 needed some resoldering. (It is a pain in the ass to resolder smd pins with an ordanary soldering iron).  Now that nasty driver behaviour makes totally sense! (PIN 14 - PIN 19 are the SDIO Pins). Finally I have a properly working Tablet.
Never perform a bios update on a working device!
NWRK.BIZ
Reply Support Not support

Use magic Report

robiom| Post time 3-5-2018 12:03:33 | Show all posts
Edited by robiom at 3-5-2018 12:22

Hi everyone

I've just found this great forum and have downloaded the firmware for my Hi8 Pro (dual boot) and it fails to flash. I've attached the log file in the hope someone can help.

Rob


Ignore all of this, I just checked and even though I thought I had the Hi8 Pro, it turns out I don't! It's just a Hi8

Flash Failed.zip

1.18 KB, Downloads: 5

Reply Support Not support

Use magic Report

rickymarchel| Post time 3-10-2018 03:02:38 | Show all posts
hi emily, my hi 8 pro model is PQ32G221611XXXXX, what bios should i download ?
thank you
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list