ChuWi Forum»Forum Chuwi Download Official Firmware [Official Version][Dualboot] Chuwi Hi12 Android, Rem ...

Follow Us

[Hi12] [Official Version][Dualboot] Chuwi Hi12 Android, Remix, Windows, Bios, driver...

  [Copy link]

emily|Post time:1-4-2018 09:33:50 View:237051|Reply:782

mklrss| Post time 12-1-2017 04:30:11 | Show all posts
Hi, Emily
I've received my HI12(dual boot) with keyboard and stylus H3 from official Chuwi store in Aliexpress last week. Basically all is good, but stylus is not work.
Nothing reactions from tablet. Battery on stylus is good, its tested with special battery test tool. In addition I've tested H1 stylus, which is not not working too.
The second malfunction is that I have no possibility to choose Windows or Android when tablet is in start process. Screen have no reactions, always downloaded last operating system, which was worked before switched off.
Serial no. of HI12 is Q64G45170900XXX
Model Name CWI520
BIOS version: 5,11 dated 16.08.2017
Stylus is important tool in my scenarios of use for this tablet. Pls. help. Can it firmware problem for some serials?
Thanks a lot in advance.
Reply Support Not support

Use magic Report

Motobot| Post time 12-1-2017 08:41:03 | Show all posts
Edited by Motobot at 12-1-2017 19:45
mklrss replied at 12-1-2017 15:30
Hi, Emily
I've received my HI12(dual boot) with keyboard and stylus H3 from official Chuwi store in ...

Hello mklrss,
The touch should not work until the operating system boots. So it should be and this is normal.
Press Volume + for selecting Android or Volume - for selecting Windows.

You can use also Left/Right keyboard arrows to switch between systems and then press Enter.
Reply Support Not support

Use magic Report

mklrss| Post time 12-1-2017 11:47:00 | Show all posts
Hello Motobot,
Thanks a lot for your kind help!  One bug fixed))).
Reply Support Not support

Use magic Report

hpStPaul| Post time 12-1-2017 19:53:57 | Show all posts
I have similar scenario.  Bought the tablet form aliexpress official store, and reassured it will work with H3 pen.
Hi12 Serial number Q64G451704025XX  H3 pen does not work (it works in the surebook)  H1 pen worked erratically but I lost that pen.  Can a firmware make it work to recognize H3 pen?
Reply Support Not support

Use magic Report

F.Krueger| Post time 12-3-2017 04:06:49 | Show all posts
hpStPaul replied at 12-1-2017 19:53
I have similar scenario.  Bought the tablet form aliexpress official store, and reassured it will wo ...

It's hardware support (I suspect that depends on the revision of screen). On the back cover must be marked "HiPen H3" (as for my version xxx709xxx).
Reply Support Not support

Use magic Report

mklrss| Post time 12-3-2017 10:03:01 | Show all posts
Bad news, my tablet have no this mark on back cover. Hovewer, I have seen on other foums, that marked tablet have the similar problem. I'll be waiting reply from Chuwi support for shure.Thanks a lot for your kind reply!
Reply Support Not support

Use magic Report

SICKNOSIS| Post time 12-8-2017 13:28:54 | Show all posts
Hi, I just purchased a new Hi12 z8350 Q64G45170901266 Hipen3 version. How can I root android and install xposed? Also is there a touch driver for this which improves touch in windows? Thanks
Reply Support Not support

Use magic Report

Motobot| Post time 12-8-2017 15:05:23 | Show all posts
Hello SICKNOSIS,
I recommend that you save all Windows drivers right now.
1. Create a folder named Drivers in the root directory of drive C
2. Run PowerShell with Administrator rights (as Admin) and perform the following command
  1. Export-WindowsDriver –Online -Destination C:\Drivers
Copy the Code

3. Move the Drivers folder to an external media for future use.
There is an important configuration file for the Goodix Touch Driver. It's TouchSetting.gt file.
1. Find the TouchSetting.gt file in C:\Windows\INF if it exists at all.
2. Copy it to an external media for future use.
Reply Support Not support

Use magic Report

levanquyen2210| Post time 12-26-2017 07:53:38 | Show all posts
Hi emily
i have hi12 seriall number: Hi12 Q64G42170900956 but it does not work Hipen Hi and Hipen H3. I need to use pen for it, so how can I use the pen Hi12 (Q64G42170900956)
Reply Support Not support

Use magic Report

brians| Post time 1-4-2018 09:33:50 | Show all posts
Not sure who posted the reference to the Chuwi Hi12 Windows 10 Anniversary update and instructions (Google Drive Link - Chuwi_Hi12_Win10_1607_14393.10_(for_Dual_OS_only)_En-US.zip) update, but I wanted to say thanks and this worked PERFECTLY with my rebuild.  Followed a bunch of instructions, but my process went as follows:

  • Install most recent Android (Chuwi Hi12 Android OS (Dual OS).rar) using the gpt_20gb.bin (renamed gpt.bin) to enlarge Android OS
  • Note - tried Remix 2.0, but found that interface poorly conceived and why they've moved on to Remix 3.0 (unsupported on Chuwi Hi12)
  • Reinstalled and setup Android apps and updates
  • then followed Windows 10 Anniversary update and instructions noted above (https://drive.google.com/open?id=0Bxhu2RIfpJeLcGxEUUZVMWNFekU)
  • Reinstalled Windows 10 perfectly and used the remaining 32GB of space.   Still have about 10GB+ of free space and presently downloading updates, so I'll let you know later what I have left after updates and patches.

Either way, thanks Chuwi or whoever created this process and update, and also note both Android 5.1 and Windows 10 Anniversary are doing MUCH much better!

Sorli...

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list