ChuWi Forum»Forum Chuwi Tablet Discussion Chuwi Hi10 Hi10 Pro - Getting Dual Boot Back

Follow Us

Hi10 Pro - Getting Dual Boot Back

[Copy link]

GFAA|Post time:5-16-2018 22:38:33 View:900|Reply:11

When i got my Chuwi Hi10pro, dual boot Android + Windows, i decided to reinstall windows and to reduce the android partition. But i ended up deleting the partition of android and ended up with only windows. Now i decided it's time to get android back, but with the tuturials that i found i couldn't get myself to it on my own. So i'm here to ask if anyone could guide me through this process of getting dual boot back. Also when i reinstalled windows i had issues with drivers and ended up havingtrouble installing some of them, so i would also want to fix that along the process.
My Chuwi Hi10 pro Serial number: HQ64G42171000049
If someone could help me out i would really appreciate it.




Reply

Use magic Report

santi.sc| Post time 5-15-2018 23:23:08 | Show all posts
Edited by santi.sc at 5-16-2018 08:28

Hello,
This is the tutorial to install again the two operating systems, you will see that it puts Vi10 Plus, do not worry it also works for the Hi10 Pro. Note that the step I of updating the BIOS does NOT have to be done, it starts from step II reinstall Android
https://forum.chuwi.com/forum.ph ... ypeid%26typeid%3D30

These are the files for the Hi10 Pro
Windows: http://www.mediafire.com/file/bww5l5j56bbi04w/HI10+H+1711XXX.rar  
Android: http://www.mediafire.com/file/nzli637vysptg6q/Android171011.rar


This version of Windows already includes the correct drivers for the computer. Keep in mind once installed that the Windows version is something old. If you choose to update from Windows Update it will take many hours to update the Tablet.
There is a faster way to update, it consists of creating a pendrive with half creation tool of Windows 10 of 64 Bits, once ready, connect the pendrive on the Tablet with the wifi disconnected and execute the file called setup, the process of Windows installation. Precautions, always do it with the charger connected.
If you have more questions do not hesitate to ask again.
Greetings.

Reply Support Not support

Use magic Report

GFAA| Post time 5-16-2018 03:49:30 | Show all posts
So when i connect the tablet in dnx fastboot mode to the pc to flash android nothing happens
Reply Support Not support

Use magic Report

santi.sc| Post time 5-16-2018 04:55:17 | Show all posts
GFAA replied at 5-16-2018 12:49
So when i connect the tablet in dnx fastboot mode to the pc to flash android nothing happens

Do you have Phone Flash Tool installed on your computer?
https://mega.nz/#!BgA0wZpb!bGebJ ... JciY0BbqtBSDmiNVpHQ

Use the original cable to connect the tablet to the computer, is an important detail, it is known that the USB C ports of these tablets are something deeper than normal and when using other cables for data with the computer may fail to detect the equipment.
Reply Support Not support

Use magic Report

GFAA| Post time 5-16-2018 05:38:05 | Show all posts
Got flash to start but this happens
https://imgur.com/a/cBZwtat
Reply Support Not support

Use magic Report

santi.sc| Post time 5-16-2018 05:41:57 | Show all posts
GFAA replied at 5-16-2018 14:38
Got flash to start but this happens
https://imgur.com/a/cBZwtat

Edit the name of the folder where the ROM is to remove the Chinese characters.
Reply Support Not support

Use magic Report

GFAA| Post time 5-16-2018 05:49:25 From the mobile phone | Show all posts
Edited by GFAA at 5-16-2018 05:52

Android is done! Thanks. Now on Windows, i would like to install the portuguese version (i got a key), how do i make it? Do i install the chuwi version first?
Reply Support Not support

Use magic Report

santi.sc| Post time 5-16-2018 06:01:05 | Show all posts
GFAA replied at 5-16-2018 14:49
Android is done! Thanks. Now on Windows, i would like to install the portuguese version (i got a key ...

Yes, first install the Windows 10 Home version of Chuwi, then you can change the language.
The license is recorded in the BIOS of your tablet, when you install the same version of Windows 10 Home it is activated automatically.
Reply Support Not support

Use magic Report

GFAA| Post time 5-16-2018 12:04:33 | Show all posts
When i try to flash windows, tablet freezes on chuwi logo. Should i try rufus?
Reply Support Not support

Use magic Report

santi.sc| Post time 5-16-2018 22:38:33 | Show all posts
GFAA replied at 5-16-2018 21:04
When i try to flash windows, tablet freezes on chuwi logo. Should i try rufus?

Have you successfully created the USB formatted in NFTS with the name of WIMPE?

All the parts containing the Windows files are downloaded and then all must be selected at the same time to decompress in a single process, the content is the one that must be placed at the root of the USB.

Well, the Tablet does not respond, it forces the shutdown, keeping the power button pressed. Then you try again. Make sure that the USB is well connected in the Tablet, I say this because there are times that the adapters that we use do not make good contact.

This format of Windows is not certain if it is for use with Rufus, in the case that you use a Microsoft ISO image of Windows 10 Home of 64 Bits keep in mind that the partitions that correspond to Windows are 12, 13, 14 and 15 You have to remove those partitions and then give it to install Windows in the unassigned free space. To all this, then start Windows without the drivers since Microsoft ISO images do not include them (touch, bluetooth, etc) you should ask Emily for the correct drivers for the serial number of your Tablet.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

12Next
Return to list
Quick Reply To Top Return to the list