# Add SSD to Chuwi Larkbox - Windows 10 licence and Boot Order

**URL:** <https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198>\
**Category:** MiniPC\
**Created:** [September 6, 2020, 8:35am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198 "2020-09-06T08:35:33Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Donut](https://avatars.discourse-cdn.com/v4/letter/d/e19adc/32.png) [@Donut](https://forum.chuwi.com/u/Donut)\
**Post date:** [September 23, 2020, 2:32pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/21 "2020-09-23T14:32:31Z")

</div>

I got my Larkbox booting from a SSD this morning.

This one: [https://www.amazon.com/gp/product/B07MSQMGLT/](https://www.amazon.com/gp/product/B07MSQMGLT/)

It worked for me, it might not work for you:  
I cloned the Windows partition and recovery partition from EMMC to SSD.  
Went into the bios to set that I could boot from the USB. And disabled the EMMC.  
Ran windows installation from USB \<= I had to put an extra fan on it because the fan wasn’t running during Windows installer, it crashed the first time.  
Windows took care of getting it to boot from the SSD.

I tried to get it to do a windows repair, but it refused to do it. Had to do a clean install. It said it would put the old files in “windows.old”.

I timed the boot before and after and it booted in 20 seconds from the EMMC, it takes 24 seconds from the SSD. SSD benchmarks pretty well.

---

<div class="post-metadata">

**Author:** ![pogomwg2000](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@pogomwg2000](https://forum.chuwi.com/u/pogomwg2000)\
**Post date:** [September 23, 2020, 8:58pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/22 "2020-09-23T20:58:35Z")

</div>

Do you have the graphics drivers installed?

---

<div class="post-metadata">

**Author:** ![pogomwg2000](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@pogomwg2000](https://forum.chuwi.com/u/pogomwg2000)\
**Post date:** [September 25, 2020, 7:49am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/23 "2020-09-25T07:49:29Z")

</div>

I did install them but the larkbox is impossibly slow, the cpu speeds are less than 0.3 ghz, it runs terrible compared to the internal emmc…

---

<div class="post-metadata">

**Author:** ![Piter](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/piter/32/3514_2.png) [@Piter](https://forum.chuwi.com/u/Piter)\
**Post date:** [September 29, 2020, 8:47am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/24 "2020-09-29T08:47:17Z")

</div>

After my LarkBox is turned off, the M.2 SSD is still on (so are the USB ports). The M.2 SSD is warm all the time (135 ° F). It is powered all the time. Check it out.

---

<div class="post-metadata">

**Author:** ![pogomwg2000](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@pogomwg2000](https://forum.chuwi.com/u/pogomwg2000)\
**Post date:** [September 29, 2020, 9:10am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/25 "2020-09-29T09:10:41Z")

</div>

Mine gets powered down, but I noticed that the windows copy on the sdd doesn’t spin the fan at all, therefore it quickly gets so hot that it starts to throttle badly.

---

<div class="post-metadata">

**Author:** ![Alain](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/alain/32/1851_2.png) [@Alain](https://forum.chuwi.com/u/Alain)\
**Post date:** [September 29, 2020, 9:51am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/26 "2020-09-29T09:51:03Z")

</div>

I saw that toi,weird ☹  
Needed to unplug from main…

---

<div class="post-metadata">

**Author:** ![Piter](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/piter/32/3514_2.png) [@Piter](https://forum.chuwi.com/u/Piter)\
**Post date:** [September 29, 2020, 10:03am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/27 "2020-09-29T10:03:44Z")

</div>

Chuwi MUST improve the bios. This is the cause of all the trouble. They have one bios and they push it everywhere with modifications. High SSD temperature (all the time) destroy my new SSD M.2 drive.

---

<div class="post-metadata">

**Author:** ![zeeve](https://avatars.discourse-cdn.com/v4/letter/z/c2a13f/32.png) [@zeeve](https://forum.chuwi.com/u/zeeve)\
**Post date:** [October 7, 2020, 8:41am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/28 "2020-10-07T08:41:30Z")

</div>

If the box is off, how can you tell the SSD is on?

---

<div class="post-metadata">

**Author:** ![Alain](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/alain/32/1851_2.png) [@Alain](https://forum.chuwi.com/u/Alain)\
**Post date:** [October 7, 2020, 6:26pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/29 "2020-10-07T18:26:47Z")

</div>

Simple: touch your unplugged LarkBox: it’s still hot 😃  
My RJ45 adapter has a led : it remains ‘on’

---

<div class="post-metadata">

**Author:** ![Biosham](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/biosham/32/351_2.png) [@Biosham](https://forum.chuwi.com/u/Biosham)\
**Post date:** [October 8, 2020, 3:20pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/31 "2020-10-08T15:20:10Z")

</div>

Have you tried to update\roll back your video driver? Some devices with the “wrong” driver may not turn off completely, but turn off the display.

---

<div class="post-metadata">

**Author:** ![Piter](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/piter/32/3514_2.png) [@Piter](https://forum.chuwi.com/u/Piter)\
**Post date:** [October 8, 2020, 6:31pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/32 "2020-10-08T18:31:50Z")

</div>

10 hours after turning off the LarkBox, the M.2 SSD is very hot.  
I touch the disk with my finger.  
All drivers up to date. I reinstalled Windows several times on eMMC and SSD M.2.

---

<div class="post-metadata">

**Author:** ![limmey](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@limmey](https://forum.chuwi.com/u/limmey)\
**Post date:** [November 4, 2020, 11:44pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/33 "2020-11-04T23:44:14Z")

</div>

So basically what i’m hearing is don’t install any new SSD drives ,just  
sounds like too many issues happening  
shame

---

<div class="post-metadata">

**Author:** ![chuwi\_park](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwi_park/32/3698_2.png) [@chuwi\_park](https://forum.chuwi.com/u/chuwi_park)\
**Post date:** [November 5, 2020, 3:35am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/34 "2020-11-05T03:35:00Z")

</div>

…what happens when you remove the old eMMC drive and leave just the new one in ?

---

<div class="post-metadata">

**Author:** ![onchung](https://avatars.discourse-cdn.com/v4/letter/o/5f9b8f/32.png) [@onchung](https://forum.chuwi.com/u/onchung)\
**Post date:** [February 11, 2021, 8:50am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/35 "2021-02-11T08:50:35Z")

</div>

i did this steps to add SSD successfully:

1. clone emmc to a new ssd
2. change boot priority to ssd in BIOS, after quit&save - boot system, i found it still boots from the emmc.
3. i tried to enter the BIOS again, on menu save&exit- Boot Overide - select Windows Boot Manager (a new SSD ID), and Larkbox will boot from SSD 🙂

---

<div class="post-metadata">

**Author:** ![CrazyOG](https://avatars.discourse-cdn.com/v4/letter/c/85e7bf/32.png) [@CrazyOG](https://forum.chuwi.com/u/CrazyOG)\
**Post date:** [February 14, 2021, 4:19am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/36 "2021-02-14T04:19:48Z")

</div>

Okay I just don’t get it I guess, but WHERE exactly are you guys finding all these great BIOS settings?  
I searched so many times now but I don’t see anything remotely that let me do any kind of options for SSD/EMMC or any way to clone anything from anything else being as that would imply that I can SEE my new m2 card I put in there.  
It simply never even shows up so I don’t have any OPTIONS for doing didly squat.

This is so frustrating.  
I just bought the Saberant M.2 2242 Rocket which cost me about the same amount as the LarkBox itself and thought life was going to be awesome and nice and speedy.  
Instead life is sucking and I can’t do much with the thing since the built-in internal storage isn’t very much.  
Or fast.

I’ve just spent over a solid week trying everything under the sun to get things to work, still zip.

I’ve been building my own systems for over 20 years so it isn’t like I’m a complete noob to this.

Thanks.

---

<div class="post-metadata">

**Author:** ![CrazyOG](https://avatars.discourse-cdn.com/v4/letter/c/85e7bf/32.png) [@CrazyOG](https://forum.chuwi.com/u/CrazyOG)\
**Post date:** [February 19, 2021, 9:25pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/37 "2021-02-19T21:25:52Z")

</div>

Sooooo… Nobody yet?  
I see replies to everyone else’s questions.  
What the heck

---

<div class="post-metadata">

**Author:** ![Biosham](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/biosham/32/351_2.png) [@Biosham](https://forum.chuwi.com/u/Biosham)\
**Post date:** [February 20, 2021, 9:13am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/38 "2021-02-20T09:13:28Z")

</div>

You have nvme ssd, larkbox supports only sata.

---

<div class="post-metadata">

**Author:** ![CrazyOG](https://avatars.discourse-cdn.com/v4/letter/c/85e7bf/32.png) [@CrazyOG](https://forum.chuwi.com/u/CrazyOG)\
**Post date:** [February 23, 2021, 4:35pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/39 "2021-02-23T16:35:12Z")

</div>

Yeah, I was beginning to have that gut feeling I bought the wrong kind, uhg.  
How could I be so stupid and lame.  
That’ll teach me to thing I can be modern and use a new fancy drive that I’ve never messed with before.  
And of course, I can’t return it (Amazon purchase) as they make it very clear you can’t return it.

So, I am assuming I also can’t even use it as an external drive either, cuz SCSI is SCSI, correct?

Still can’t believe I would make such an obvious mistake, sheesh. (eyes are rolling big time)

---

<div class="post-metadata">

**Author:** ![Biosham](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/biosham/32/351_2.png) [@Biosham](https://forum.chuwi.com/u/Biosham)\
**Post date:** [February 23, 2021, 4:51pm UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/40 "2021-02-23T16:51:39Z")

</div>

You can connect ssd via usb nvme m.2 adapter, but the speed can be very slow.

---

<div class="post-metadata">

**Author:** ![CrazyOG](https://avatars.discourse-cdn.com/v4/letter/c/85e7bf/32.png) [@CrazyOG](https://forum.chuwi.com/u/CrazyOG)\
**Post date:** [March 4, 2021, 6:21am UTC](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198/41 "2021-03-04T06:21:51Z")

</div>

Was just watching a video where the guy is explaining the differences between the two types, and he said that the port type that also matches the kind I see in the box I have.  
He says either kind can be used as they are interchangeable.

[![](https://us1.discourse-cdn.com/flex020/uploads/chuwi/original/2X/9/9bf6fd6d8cf01d2fccfabcda45962206d5e9fc7f.jpeg "Explaining the Difference Between SSD NVMe and M2 SATA and mSATA") ](https://www.youtube.com/watch?v=s-2VrxgI49Q)

Mine is the single key type.  
Which BTW was why I bought the one I did.

But tomorrow I get an adapter for the thing.  
I can at least use the thing.

[Previous page](https://forum.chuwi.com/t/add-ssd-to-chuwi-larkbox-windows-10-licence-and-boot-order/14198.md?page=1)
