# Hipad max not starting

**URL:** <https://forum.chuwi.com/t/hipad-max-not-starting/43823>\
**Category:** HiPad Max\
**Created:** [March 19, 2024, 6:14pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823 "2024-03-19T18:14:15Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Amigo326](https://avatars.discourse-cdn.com/v4/letter/a/b5a626/32.png) [@Amigo326](https://forum.chuwi.com/u/Amigo326)\
**Post date:** [April 3, 2024, 7:13pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/21 "2024-04-03T19:13:04Z")

</div>

Hi manonegra22, the answer to all your questions is yes.  
After confirmation that the flashing was successful I disconnected the tablet but found that nothing had changed on it. It still went to the menu that showed prior to the flashing.

---

<div class="post-metadata">

**Author:** ![manonegra222](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/manonegra222/32/11498_2.png) [@manonegra222](https://forum.chuwi.com/u/manonegra222)\
**Post date:** [April 3, 2024, 7:52pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/22 "2024-04-03T19:52:33Z")

</div>

Your device does not support the system flash because it is locked, as indicated on the screen. For it to be supported it must be unlocked and in fast boot mode. I don’t know if it is possible to unlock on that screen by going down to the “locked” line and changing this state with the volume buttons to “unlocked”

---

<div class="post-metadata">

**Author:** ![Amigo326](https://avatars.discourse-cdn.com/v4/letter/a/b5a626/32.png) [@Amigo326](https://forum.chuwi.com/u/Amigo326)\
**Post date:** [April 3, 2024, 8:18pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/23 "2024-04-03T20:18:17Z")

</div>

Hi again, the menu doesn’t allow me to select the device locked info the lines below the top seem to be for info only - the only things that you can access are on the top line but they don’t work as when you select any of them (except power off) the tablet just loops back to the same menu again which no changes being made.  
I can video the process if you would like to see what’s happening.

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [April 4, 2024, 12:36pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/24 "2024-04-04T12:36:09Z")

</div>

if you make a video that would help for sure.  
Did you try to do what i said in my previous post? the new things that tech told me?Or still cannot be done because is locked?

---

<div class="post-metadata">

**Author:** ![Amigo326](https://avatars.discourse-cdn.com/v4/letter/a/b5a626/32.png) [@Amigo326](https://forum.chuwi.com/u/Amigo326)\
**Post date:** [April 4, 2024, 4:12pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/25 "2024-04-04T16:12:45Z")

</div>

Hi, I’ve found the point where you select IsEraseAll and IsReboot and have added com port but can’t find any point to start the process. SWDLtools says Ready but no button to start it off

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [April 4, 2024, 4:24pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/26 "2024-04-04T16:24:50Z")

</div>

![c4204287f42d40248340d2fd94bb1652](https://us1.discourse-cdn.com/flex020/uploads/chuwi/original/2X/0/065aa08ce2560c89c9aab24b3a94d9de777b4f64.png)  
What about if you click on “save” maybe another window like ready will appear? .

---

<div class="post-metadata">

**Author:** ![Amigo326](https://avatars.discourse-cdn.com/v4/letter/a/b5a626/32.png) [@Amigo326](https://forum.chuwi.com/u/Amigo326)\
**Post date:** [April 4, 2024, 4:31pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/27 "2024-04-04T16:31:09Z")

</div>

Yes goes back to first window that says ready but can see no button to start process

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [April 4, 2024, 4:36pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/28 "2024-04-04T16:36:26Z")

</div>

can you make us a video? because at this point, i really do not know , maybe with a video @manonegra222 will be able to help.

---

<div class="post-metadata">

**Author:** ![Amigo326](https://avatars.discourse-cdn.com/v4/letter/a/b5a626/32.png) [@Amigo326](https://forum.chuwi.com/u/Amigo326)\
**Post date:** [August 13, 2024, 2:47pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/29 "2024-08-13T14:47:59Z")

</div>

hi, can you provide me with a link or email address for the germany repair centre as i am prepared to send the tablet to them to fix this rather than discard and forget it,

thanks

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [August 13, 2024, 4:18pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/30 "2024-08-13T16:18:09Z")

</div>

Write to [store@chuwi.com](mailto:store@chuwi.com) and tell me when you do so i can tell my collague to help you with that

---

<div class="post-metadata">

**Author:** ![Amigo326](https://avatars.discourse-cdn.com/v4/letter/a/b5a626/32.png) [@Amigo326](https://forum.chuwi.com/u/Amigo326)\
**Post date:** [August 13, 2024, 9:04pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/31 "2024-08-13T21:04:41Z")

</div>

Hi Maria, I have emailed [store@chuwi.com](mailto:store@chuwi.com) and copied you in on the email so you can see what I have said.

Thanks

Carl

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [August 14, 2024, 1:45am UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/32 "2024-08-14T01:45:35Z")

</div>

Ok, i told him

---

<div class="post-metadata">

**Author:** ![Amigo326](https://avatars.discourse-cdn.com/v4/letter/a/b5a626/32.png) [@Amigo326](https://forum.chuwi.com/u/Amigo326)\
**Post date:** [August 14, 2024, 9:08am UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/33 "2024-08-14T09:08:45Z")

</div>

Hi, can you confirm you got my email to [store@chuwi.com](mailto:store@chuwi.com) as I’ve received a notification that the email failed to deliver

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [August 14, 2024, 10:29am UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/34 "2024-08-14T10:29:39Z")

</div>

Yes we got it, i saw your email this morning.

---

<div class="post-metadata">

**Author:** ![Pier63](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@Pier63](https://forum.chuwi.com/u/Pier63)\
**Post date:** [October 11, 2024, 4:04pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/35 "2024-10-11T16:04:48Z")

</div>

Hi everyone, I’ve the same situation as amigo326.  
Could you give me the procedure for flashing?  
My code is JHIPDMKK20230104569.

Thanks

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [October 12, 2024, 2:30am UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/36 "2024-10-12T02:30:43Z")

</div>

> [@Pier63](#):
>
> JHIPDMKK20230104569

OS

> **[HiPadMAX-680-ROW-NEW-2022-1213-U-V.1.6](https://www.mediafire.com/file_premium/uehb7gcrilt8rjy/HiPadMAX-680-ROW-NEW-2022-1213-U-V.1.6.7z/file)**
>
> MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

> **[Manual Flashing HiPAd MAx](https://www.mediafire.com/file_premium/me43kaixyhtsee0/Manual_Flashing_HiPAd_MAx.docx/file)**
>
> MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

> **[Max Flashing tutorial](https://www.mediafire.com/file_premium/ufw5l5s3jfnnn4t/Max_Flashing_tutorial_.mov/file)**
>
> MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

> **[刷机工具+教程flashtool](https://www.mediafire.com/file_premium/9jrlbmproproz4t/%25E5%2588%25B7%25E6%259C%25BA%25E5%25B7%25A5%25E5%2585%25B7%252B%25E6%2595%2599%25E7%25A8%258Bflashtool.rar/file)**
>
> MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

---

<div class="post-metadata">

**Author:** ![Pier63](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@Pier63](https://forum.chuwi.com/u/Pier63)\
**Post date:** [October 13, 2024, 3:28pm UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/37 "2024-10-13T15:28:57Z")

</div>

I can’t see the HiPad folders into my PC, I’ve installed the driver.  
I run the qfill program but without the HiPad folders onto the pc in not possible to do anything.  
Can you help me?

---

<div class="post-metadata">

**Author:** ![ChuwiESnotactive](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.chuwi.com/chuwiesnotactive/32/8190_2.png) [@ChuwiESnotactive](https://forum.chuwi.com/u/ChuwiESnotactive)\
**Post date:** [October 14, 2024, 2:23am UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/38 "2024-10-14T02:23:31Z")

</div>

Try this instead

> **[Flashing Tool Driver new](https://www.mediafire.com/file_premium/jm0vail7x1xe1v9/Flashing_Tool_Driver_new.rar/file)**
>
> MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

> **[Flashtool drivers Hipadmax](https://www.mediafire.com/file_premium/l9yius98urhflye/Flashtool_drivers_Hipadmax.rar/file)**
>
> MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

> **[flashtool HiPadMax](https://www.mediafire.com/file_premium/ts2nybo0hi3b00z/flashtool_HiPadMax.rar/file)**
>
> MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

---

<div class="post-metadata">

**Author:** ![Pier63](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@Pier63](https://forum.chuwi.com/u/Pier63)\
**Post date:** [October 16, 2024, 5:35am UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/39 "2024-10-16T05:35:28Z")

</div>

Good morning.  
In the end, I managed to enter the fastboot menu and restore factory settings; the tablet started working again.  
Just one thought, if the tablet can lose settings so easily when it crashes, it makes me worry that something similar could happen with other devices like laptops.  
This statement suggests that Chuwi, as a manufacturer, needs to improve the stability of their products, addressing issues like data loss and crashes to instill greater confidence in their customers.

Thanks again fot the support.

---

<div class="post-metadata">

**Author:** ![Kudlaty](https://avatars.discourse-cdn.com/v4/letter/k/c4cdca/32.png) [@Kudlaty](https://forum.chuwi.com/u/Kudlaty)\
**Post date:** [October 16, 2024, 7:18am UTC](https://forum.chuwi.com/t/hipad-max-not-starting/43823/40 "2024-10-16T07:18:17Z")

</div>

Hello everyone on the forum. I’m new here so please be understanding. I also have the same problem and I am asking for help. My device’s serial number is JHipdMKK20221100392

[Previous page](https://forum.chuwi.com/t/hipad-max-not-starting/43823.md?page=1)
