# LapBook Pro (2019) SATA-3 Enable - BIOS Update Request

**URL:** <https://forum.chuwi.com/t/lapbook-pro-2019-sata-3-enable-bios-update-request/15181>\
**Category:** LapBook Pro\
**Created:** [October 3, 2020, 8:22am UTC](https://forum.chuwi.com/t/lapbook-pro-2019-sata-3-enable-bios-update-request/15181 "2020-10-03T08:22:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![wookie](https://avatars.discourse-cdn.com/v4/letter/w/e36b37/32.png) [@wookie](https://forum.chuwi.com/u/wookie)\
**Post date:** [October 3, 2020, 8:22am UTC](https://forum.chuwi.com/t/lapbook-pro-2019-sata-3-enable-bios-update-request/15181/1 "2020-10-03T08:22:43Z")

</div>

Dear Support,

Can you please help me, LabBook Pro 8G/256 SSD was purchased, the crystal-mark disk test utility shows the SSD is working in SATA-2 mode, while mainboard and processor are supporting SATA-3. In current BIOS settings there is no way to switch on SATA-3.

**Issue:** Read-Write speed is ~100-200 Mb/s (depends on block size), which corresponds to SATA-2. System is capable to handle SATA-3.

\*\*Request to Support: @Support \*\* I know there shall be LabBook Pro CHUWI official BIOS update, which is enabling SATA-3 by default, but I’m struggling to find it for download. Please advise?
