# LARKBOX HDMI issues **URL:** \ **Category:** MiniPC\ **Created:** [November 4, 2020, 4:40pm UTC](https://forum.chuwi.com/t/larkbox-hdmi-issues/16407 "2020-11-04T16:40:09Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![pault](https://avatars.discourse-cdn.com/v4/letter/p/b9bd4f/32.png) [@pault](https://forum.chuwi.com/u/pault)\ **Post date:** [November 4, 2020, 4:40pm UTC](https://forum.chuwi.com/t/larkbox-hdmi-issues/16407/1 "2020-11-04T16:40:09Z")
My Larkbox has issues when connected via HDMI to my projector. Very often (but not always) the projector reports ‘no signal’ when I switch on the LarkBox. This only happens with the LarkBox, all other devices that I connect to the projector work properly. Please help as this is very frustrating. ---
**Author:** ![Nameless](https://avatars.discourse-cdn.com/v4/letter/n/779978/32.png) [@Nameless](https://forum.chuwi.com/u/Nameless)\ **Post date:** [December 27, 2020, 11:14pm UTC](https://forum.chuwi.com/t/larkbox-hdmi-issues/16407/2 "2020-12-27T23:14:28Z")
I have a same problem on my 32 inch JVC smart TV. It didn’t show before enter Windows logon screen. but after I change the TV input source type from regular to enhanced ![IMG_20201227_230900](https://us1.discourse-cdn.com/flex020/uploads/chuwi/original/2X/0/0409cf7c6b5739a59a0c3f34f915bb4136d76da4.jpeg) the problem was fixed. now I can enter to the bios using my 32 inch TV. Hope this can help you. Cheers. Note: This is based on my Larkbox Pro. ---
**Author:** ![fimi24](https://avatars.discourse-cdn.com/v4/letter/f/898d66/32.png) [@fimi24](https://forum.chuwi.com/u/fimi24)\ **Post date:** [December 27, 2021, 6:13pm UTC](https://forum.chuwi.com/t/larkbox-hdmi-issues/16407/3 "2021-12-27T18:13:32Z")
> [@Larkbox pro hdmi no signal](https://forum.chuwi.com/t/larkbox-pro-hdmi-no-signal/17362/2): > > HDMI Out monitor no signal. I tried a HDMI to USB converter. Everything works in the OBS Studio program. Larkbox no brick. slight_smile