# Minibook X pen/digitizer performance **URL:** \ **Category:** MiniBook\ **Created:** [November 6, 2022, 11:41am UTC](https://forum.chuwi.com/t/minibook-x-pen-digitizer-performance/35984 "2022-11-06T11:41:19Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![mobby](https://avatars.discourse-cdn.com/v4/letter/m/67e7ee/32.png) [@mobby](https://forum.chuwi.com/u/mobby)\ **Post date:** [July 13, 2023, 2:47pm UTC](https://forum.chuwi.com/t/minibook-x-pen-digitizer-performance/35984/3 "2023-07-13T14:47:32Z")
> [@RavenRaven](#): > > Hi, I have recently bought the old version of MiniBook X, I can confirm that I have the exact same issue. > > Did you find a solution ? Yep! I eventually found a solution. The diagonal jitter is still there mostly but everything else is working much nicer. Unfortunately it’s somewhat risky and/or complicated and you have to run some sketchy software so there’s a chance it will ruin your minibook 🙂 It worked eventually for me so check out this post in another thread: > [@Need YOUR help fixing my Minibook X touchscreen](https://forum.chuwi.com/t/need-your-help-fixing-my-minibook-x-touchscreen/36316/9): > > All right! In your case it seems that the resolution was for some reason different than on my Minibook, so I wouldn’t suggest using my file directly. I think the simplest way would be: Open the “a\_JacekJagosz\_original” file with the GTP tool. This is exactly the settings you gave me earlier. Change the filtering settings (as on the screenshot) and save it to a new file Use the “hid\_i2c\_update” tool to flash the new configuration This is exactly what I did at the end: used your file, changed… --- _[View the full topic](https://forum.chuwi.com/t/minibook-x-pen-digitizer-performance/35984)._