ChuWi Forum»Forum Chuwi Download Official Firmware [Official Version] Chuwi Hi13 Windows, Driver, Bios ...

Follow Us

[Hi13] [Official Version] Chuwi Hi13 Windows, Driver, Bios Download

[Copy link]

emily|Post time:9-12-2018 21:00:05 View:43584|Reply:201

emily| Post time 6-10-2018 17:40:41 | Show all posts
artowi replied at 6-9-2018 02:39
@ Emily

a very new Hi13 sent from CHUWI as replacement for non-repearable unit at Hungarian shop wi ...

hello, could you please try this link
http://www.mediafire.com/folder/hzhco7gb8x5rj/windows
here is the tutorial, please check it
http://www.mediafire.com/file/5i ... 591_12-28.docx/file
Reply Support Not support

Use magic Report

artowi| Post time 6-11-2018 00:34:39 | Show all posts
Hi Emily,

WINDOWS could not be installed because the device reported 'no HDD'  

I got instruction from service@chuwi.com to reinstall BIOW so I downloaded the lastest one you have posted (Q64G45170901726.rar) and flashed.

Update procedure went thru without error but now the device is fully bricked and won't turn on at all.

Any hope or fatal end??
Reply Support Not support

Use magic Report

emily| Post time 6-11-2018 02:06:08 | Show all posts
artowi replied at 6-11-2018 00:34
Hi Emily,

WINDOWS could not be installed because the device reported 'no HDD'  

Hello, could you please try this bios
http://www.mediafire.com/file/os ... 2526EC_219.rar/file
hope this can help you
Reply Support Not support

Use magic Report

artowi| Post time 6-11-2018 02:44:13 | Show all posts
Thanks for the quick reply!

Unfortunately this is the BIOS which now killed the Hi13 fully and no more try possible because unit cannot switch on any longer.

As mentioned before serial number is Q64G45180201525  (2018, not 2017!)  and the last working BIOS was M1W6_AP135_A.064 Built  01/31/18

I would not have dared to install much older BIOS unless clearly instructed from CHUWI.   

Updating just the EC Memory without changing BIOS did not fix the HDD problem so it could be HW-Defect on the Mainboard.
Reply Support Not support

Use magic Report

artowi| Post time 6-12-2018 01:55:44 | Show all posts
Important warning message to owners of Hi13 with Serial number Q64G451802xxxxx having BIOS M1W6_AP135_A.064 installed:

Do not follow CHUWI's instruction to install BIOS I2W6_AP135.037 to this version of the Hi13.  It will be bricked and you will not even be able to turn on and you will have no chance to revert back !!

Probably there is a new revision of hardware out and CHUWI support is not aware of this.
Reply Support Not support

Use magic Report

abruptly| Post time 8-9-2018 07:42:48 | Show all posts
artowi replied at 6-11-2018 02:44
Thanks for the quick reply!

Unfortunately this is the BIOS which now killed the Hi13 fully and no m ...

привет что бы запустить планшет нужно разобрать его и отцепить провода от разъем батареи которые отвечают за ее состояние , оставить только  + и - , мне помогло, планшет включился тем самым смог повторно обновить биос, сам планшет ожил, но заряжаться по прежнему не хочет! думаем как дополнительный контроллер зарядки поставить.
Reply Support Not support

Use magic Report

Hackerjac| Post time 8-10-2018 04:28:19 | Show all posts
abruptly replied at 8-9-2018 16:42
привет что бы запустить планшет нужно разобрать его и ...

Please keep it plain English in the English part of the forum
I do NOT work for Chuwi. Please DO NOT pm or email me with problems you may have!
Reply Support Not support

Use magic Report

Kerrian| Post time 8-28-2018 02:56:52 | Show all posts
Note: The author has been banned or deleted.
Reply Support Not support

Use magic Report

brushjak| Post time 9-12-2018 05:40:53 | Show all posts
Edited by brushjak at 9-12-2018 07:11

Hi Emily,

I need desperately your help. Rrecovery process ended up with login screen of Other User without allowing me to create my own credentials. Therefore I've tried to install Linux Mint & Kubuntu to try it whether it will work = didn't :-(.

So I flashed the BIOS to I2W6_AP135.037 X65 and downloaded WIN10 for my HI13 which is Q64G45170700471 and tried to install it. But the installation process ended up with red screen that the installation couldn't be completed due to inappropriate key missing in BIOS. I literally don't know what that means. I'd like to install WIN10 back on the device so I can use it for general office use but I'm stuck now. I even tried to flash BIOS to the other version but this can be done as I got only some weird screen (see pics).  

I double checked the BIOS settings, I do have boot priorities #1 UEFI (see pics), OS is selected to Windows so I don't have a clue what can be wrong. I even got typical blue screen that I need recovery disc....which I don't understand as I got this message using USB stick with WIN10 downloaded from here....
PS: I've downlaoded WIN10 from MS site just to try it and the installation went just well. I do have now WIN10 but I'm not willing to pay MS full licence as I still believe CHUWI can help me with this issue. As this proves, that the problem is only with BIOS + WIN version for my device.

I'm quite desperate as I really like HI13 but it seems that I do something wrong. Could you please help me???? Pleaaaaaseeeee!!!!!!

bios 1

bios 1

bios 2

bios 2

bios 3

bios 3

instal screen

instal screen
Reply Support Not support

Use magic Report

jacekplacek| Post time 9-12-2018 21:00:05 | Show all posts
Hi Emily

I need a bios to Chuwi HI13, serial Q64G45171201888, motherboard 74P1R1AP135.
Bios I2W6_AP135.037&EC_219 does not work.
Maybe M1W6_AP135_A.064 x64 will be good?

Thanks,


Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list