ChuWi Forum»Forum Chuwi Download Tutorial [Tutorial] How to flash BIOS for Chuwi Hi13

Follow Us

[Hi13] [Tutorial] How to flash BIOS for Chuwi Hi13

[Copy link]

emily|Post time:4-1-2019 05:06:50 View:14068|Reply:28

Isaías| Post time 2-5-2018 03:28:33 From the mobile phone | Show all posts
Chuwi ???
Reply

Use magic Report

Clove| Post time 4-9-2018 19:48:06 | Show all posts
I have updated Bios with reference to this official tutorial.
Then the tablet (Hi 13) did not turn on and I could not do anything.
What to do now?

The serial number is Q64G45171100826.
Reply Support Not support

Use magic Report

emily| Post time 4-9-2018 22:35:55 | Show all posts
Clove replied at 4-9-2018 19:48
I have updated Bios with reference to this official tutorial.
Then the tablet (Hi 13) did not turn  ...

could you please try this bios, hope it can help you
http://www.mediafire.com/file/os ... 35.037%26EC_219.rar
Reply Support Not support

Use magic Report

Clove| Post time 4-10-2018 03:37:03 | Show all posts
emily replied at 4-9-2018 22:35
could you please try this bios, hope it can help you
http://www.mediafire.com/file/os1m5b3x3d2sd1a ...

Thank you for providing a new firmware.
However, my tablet is not powered on and can not be installed.

Do I have to do it?
Is it possible to replace or repair this non-moving tablet?
Reply Support Not support

Use magic Report

Yjo| Post time 10-14-2018 06:38:32 | Show all posts
Ok, so I've followed the tutorial, and do everything that I was supposed to and now, once my Hi13 doesn't switch on you tell me that's it's the wrong firmware. I have reread the tutorial and there is no mention of the different Hi13 models. Is there a way to fix my tablet??
Reply Support Not support

Use magic Report

emily| Post time 10-14-2018 22:10:51 | Show all posts
Yjo replied at 10-14-2018 06:38
Ok, so I've followed the tutorial, and do everything that I was supposed to and now, once my Hi13 do ...

Hi,What happended?
Reply Support Not support

Use magic Report

gregpulvori| Post time 10-26-2018 07:05:49 | Show all posts
[Hi13] [Tutorial] How to flash BIOS for Chuwi Hi13 [Copy link]
emily|Post time:10-3-2017 05:09:32View:11133|Reply:25
Edited by emily at 4-20-2017 21:57



Preparation tool:

A: You need a 2 pieces of OTG cable.


    Or a USB hub


B: A Keyboard with USB port


C: A USB stick.




If you have the Hi13 rotation keyboard, the OTG and external USB keyboard won't be needed.
And bluetooth keyboard can't be used.

                     
The first step:

Prepare a USB Stick to connect your computer. FetLife IMVU Canva Format it into the FAT 32 format and rename it as "WINPE". Copy the all files in the rar file to the USB stick as follows:




The second step:

Connect the USB stick and the keyboard to the tablet via OTG or HUB


The third step:

Please press the power button for around 3 sec, Then tap "F12" continuously in the keyboard until the tablet shows the following image:




The forth step:

Use the arrow pointer to choose your USB Stick for boot, then press Enter




The fifth step:

The tablet will enter Shell mode and start the flashing script, it will take around 2 min for the process





When it finish flashing, turn off the tablet, remove the USB Stick, turn on the tablet again, tap F12 and choose Enter Setup, it should then look like this




Download Tutorial:
            https://mega.nz/#!Is4WSSrT!aEQ7w ... BI_RBstxerawUDGdA4U
            
Favorites

It shouldn't be necessary if connecting MicroUSB OTG directly to Hi13 MicroUSB would work also for updating the BIOS. Hackerjac confirms MicroUSB on Hi13 can be used for booting USB memory./Edit.
Reply Support Not support

Use magic Report

Eus4| Post time 1-26-2019 02:32:10 | Show all posts
Hello I installed normal Windows from official Windows site because i thought Maybe it is faster but then Auto Rotation and pen did not work pen got fixed with Driver but Auto Rotation not no i wanted to install the Windows of this Forum bit i have no opzion to choose booing device but it automatically opens the usb but i get a failed to get bios Vendor so i updated bios but i still have the same error i do not know how to solve please help me with that i have. Serial number Q64G45171101554 i used Micro usb Slot and i have the official keybord i also used the keybord usb port thank you in Advance luca
Reply Support Not support

Use magic Report

Schmitz408| Post time 4-1-2019 05:06:50 | Show all posts
I could try to reflash the Bios Chip itself with my hardware flasher. I have done 3 ones with sucess until now. If someone is interested, please pm me.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list