ChuWi Forum»Forum Chuwi Download Official Firmware Is there Windows 10 for hi8 pro plus 4gb?

Follow Us

[Hi8 Pro] Is there Windows 10 for hi8 pro plus 4gb?

[Copy link]

fkapsk1|Post time:2-18-2018 18:35:36 View:754|Reply:6

I have a Hi8 Pro Plus 4GB product.

This product supports the specifications of z8300 / 4GB / 32GB.

The number of this product is PQ32g221612XXXXX.

The official dualboot version
"used for serial number after 32G221608XXXXX, 64 bit"
There is an item called.
I do not know if this is the right data for my product.

I can not find any Windows source for my product serial other than just that.
Reply

Use magic Report

santi.sc| Post time 2-18-2018 06:26:11 | Show all posts
I do not see any store that sells the Hi8 Pro Plus 4Gb RAM.

All the Hi8 Pro are 2Gb RAM and 32GB. I miss that name of Plus that you indicate, do you have the link of the product where you bought it?
Reply Support Not support

Use magic Report

Motobot| Post time 2-18-2018 08:53:01 | Show all posts
Hello fkapsk1,

I suggest you create the Windows install file by yourself. Here's a detailed manual.
There is a ready-made compiled x86 install file for Hi8 Pro.
Reply Support Not support

Use magic Report

fkapsk1| Post time 2-18-2018 16:27:20 | Show all posts
santi.sc replied at 2-18-2018 06:26
I do not see any store that sells the Hi8 Pro Plus 4Gb RAM.

All the Hi8 Pro are 2Gb RAM and 32GB. I ...


Here it is.
https://www.qoo10.com/item/CHUWI ... D-WINDOWS/528081239


But it will not sell anymore.
Reply Support Not support

Use magic Report

fkapsk1| Post time 2-18-2018 16:57:41 | Show all posts
Motobot replied at 2-18-2018 08:53
Hello fkapsk1,

I suggest you create the Windows install file by yourself. Here's a detailed manual. ...

Thank you motobot

I'll try it.

But there is one question.

I recently made many attempts to install your windows 10 Fall creator.

However, the following problems were not able to be installed.

1) Select WINPE USB in F7 boot mode or "W" in dual boot

Result:
"[Fail] Could not locate '\ efi \ boot \ bootx64.efi': [14] Not Found




2) Force Paste the bootx64.efi file to WINPE USB

result :
winpe -> applying image ...

"failed to set boot information"


When trying to install with other chuwi 32-bit windows, "W" does not appear on the dual boot screen unlike 64-bit Windows.

Is this a bios problem?

I do not understand this part.
Reply Support Not support

Use magic Report

Motobot| Post time 2-18-2018 17:26:40 | Show all posts
fkapsk1,
Perhaps Secure Boot does not allow you to boot and to flash x86 Windows. You can try to disable it in UEFI BIOS, but it's risky. Apparently, you should use an x64 Windows install file only.
Reply Support Not support

Use magic Report

fkapsk1| Post time 2-18-2018 18:35:36 | Show all posts
Motobot replied at 2-18-2018 17:26
fkapsk1,
Perhaps Secure Boot does not allow you to boot and to flash x86 Windows. You can try to dis ...


Thank you very much motobot

The answer was very helpful.

Let's try your compile guide.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list