ChuWi Forum»Forum Chuwi Download Tutorial [TUTORIAL] Remove Windows on the Dual Boot tablet.

Follow Us

[Hi10 Plus] [TUTORIAL] Remove Windows on the Dual Boot tablet.

[Copy link]

santi.sc|Post time:9-11-2018 06:12:44 View:4184|Reply:18

Edited by santi.sc at 2-24-2018 18:21

You use more Android than Windows in the dual boot Tablet and you are considering leaving all the space available for Android, this thread can help you achieve it:
To leave all the space available for Android according to my experience these steps that anyone can do, paying attention to some details before getting down to work.
Each one is responsible for the modifications that he makes in his team, these steps have been checked and everything has gone well.

-It is advisable to make a copy of the security of the computer in its current state.
-Download and install the Intel Phone Flash Tool.
-Rom original for the tablet, verifying the serial number and processor of the computer to download the correct Rom from the downloads section of this forum.
-Windows computer
-More than 50% battery in the tablet
-Cable Type-C to be the original
- Modified file gpt.bin


Download Phone Flash and .bin Files


-We install the Phone Flash Tool program in the computer together with the drivers that come in the folder.



-Download the official ROM on the computer and unzip the folder, we see that inside there is a file called gpt.bin we have to replace that file with the gpt_53g.bin called Mega folder and in turn we have to change the name as gpt.bin to this new file that we will add to the contents of the Rom.





**What are the other gpt_XXg.bin files inside the Mega download link?
With those files we can play with the Android partition, for example, if we want to have 8GB free in Android we have to use the so-called gptT_8g.bin, the one of 16 to have 16Gb and so on. This type of partial modification I do not see it useful because we will lose a necessary space in Windows and when installing updates can cause problems.

We continue with steps to have the Tablet with only Android with all the available space.
We begin the process that will erase all the data we have inside.

-We start the tablet in Windows to suppress the dual boot menu:
- You run the SwitchNOW application from the shortcut on the Windows desktop.
-You click on No when the question pops up Are you sure to switch to Android?
-Select disable.
-Switch off the tablet

-We opened Phone Flash Tool as administrator.
- Browse Browse the rom for tablet where we have previously modified the gpt.bin file and select the option flash.json



-With the tablet off, we press the three buttons at the same time without releasing them until we get the DNXFASTBOlOT MODE mode on the screen.



-Connect the tablet with the USB Type-C cable to the computer and this has to be detected by the Intel program.
-We mark the box with the Recover option
-Initialize the flash of the rom with that in the tablet we will get the android logo and some yellow letters until the installation of the rom is finished, where the tablet will automatically restart where we will have in the internal memory all the free space for Android.





The photos are in Spanish, I'm sorry if you do not understand any part of the photo, you can ask before doing the process.
Tested on a Hi10 Plus and everything works perfect, this process should work on all 64Gb dual boot tablets. Before doing this process evaluate that Windows disappears from the computer so it is important to not forget to do the step of removing the dual boot menu as indicated in this tutorial.Good luck.
Reply

Use magic Report

manonegra222| Post time 2-24-2018 13:39:49 | Show all posts
Thank you very much for this detailed tutorial. It will help many interested.
Reply Support Not support

Use magic Report

lebearnais| Post time 3-28-2018 05:48:50 | Show all posts
Hi

thanks for this detail tutorial. i would like to do the same thing but when I try to download Android rom, a password is asked.
Do you have the password?
Can you indicate where to download the ROM?
I have a Z8350

regards
Reply Support Not support

Use magic Report

santi.sc| Post time 3-28-2018 06:11:47 | Show all posts
lebearnais replied at 3-28-2018 14:48
Hi

thanks for this detail tutorial. i would like to do the same thing but when I try to download An ...

Hello,

The available Roms change according to the serial number of your Tablet, model and processor. If you can not find the appropriate Rom for your Tablet, enter this information to verify the correct one.
If at any time you ask for a password to download it is usually this: en.chuwi.com
Reply Support Not support

Use magic Report

jerryjhones| Post time 3-28-2018 10:50:31 | Show all posts
thanks for this information and help .i have used a device which is windows 10 support tablet but there is no longer space for doing the other thing but the information given in this post help me to solve the problem.
Reply Support Not support

Use magic Report

AaJay| Post time 4-1-2018 07:10:48 | Show all posts
Hello there!
Do you have a gpt.bin file for 32gb partition? ^^
Google weren't my friend in this task, to find one...
Reply Support Not support

Use magic Report

santi.sc| Post time 4-1-2018 07:56:35 | Show all posts
AaJay replied at 4-1-2018 16:10
Hello there!
Do you have a gpt.bin file for 32gb partition? ^^
Google weren't my friend in this task ...

Hello, if you check the attachment. You already have the name of the file changed once you unzip it replaces this file in the original rom before flashing.
Good luck!!



GPT_32GB.zip

560 Bytes, Downloads: 41

Reply Support Not support

Use magic Report

Juniho| Post time 4-11-2018 06:37:20 | Show all posts
Exccellent thank you for the Tutorial I have just followed it to the letter and removed windows from my device which I do not use and it is working perfectly.
Thank you for doing this, now I don't have to remove some apps to update others and can install more if I wish because of the extra space the flash tool provided.
Reply Support Not support

Use magic Report

santi.sc| Post time 4-11-2018 07:56:19 | Show all posts
I'm glad that it helps, now to enjoy your tablet
Reply Support Not support

Use magic Report

Karaluch| Post time 9-11-2018 06:12:44 | Show all posts
Edited by Karaluch at 9-11-2018 09:50

Hello, I have trouble with connecting my tablet in fastboot mode to windows 10 PC, got unrecognized USB device error. I installed first IntelAndroidDrvSetup1.5.0, then iSocUSB-Driver-Setup-1.2.0 as administrator like advised. Any help?
Edit: I was able to avoid error connecting device with active android and inducting fastboot mode using adb command.

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

12Next
Return to list
Quick Reply To Top Return to the list