ChuWi Forum»Forum Chuwi Download Official Firmware [Official Version] Chuwi LapBook SE Windows, BIOS, ...

Follow Us

[Lapbook] [Official Version] Chuwi LapBook SE Windows, BIOS, Drivers,Download

[Copy link]

emily|Post time:7 day(s) ago View:2845|Reply:14

Pavel.spb| Post time 10-12-2018 00:49:36 | Show all posts
Hello.
There is a GPS module BCM4752 in the laptop. Where can I download drivers?
Reply Support Not support

Use magic Report

darksider| Post time 10-28-2018 04:52:53 | Show all posts
anyone tryed format both drives and reinstall windows? from original windows iso?
Reply Support Not support

Use magic Report

santi.sc| Post time 10-28-2018 06:33:38 | Show all posts
darksider replied at 10-28-2018 13:52
anyone tryed format both drives and reinstall windows? from original windows iso?

It is a simple process, format the two storage units and install Windows again on the SSD. The first thing you have to do is a personal copy of the computer drivers (although you have them available in the first comment), you can use the Double Drivers program for this step.

Then if you choose to use the official Windows version of Chuwi, normally this version already has the drivers included in the installation. To do this step you have to download the file corresponding to Windows of the first page and create a USB of minimum 16Gb formatted in NTFS with the name WIMPE. To do this download the file unzip and place the result in the root of this USB. Once prepared with the Lapbook turned off, connect the USB and turn the laptop on by pressing the F7 key repeatedly until the option to start from USB appears on the screen, select it and let the Windows installation executable work automatically.


As you say you can use a Windows ISO image, with this method if it will be necessary to install the drivers after installing Windows.
The steps would be to create a USB boot with the ISO image of Windows 10. Once prepared connect the USB to the computer off and press the F7 key while turning on the computer, until you jump on the screen the start option from USB, in the next step select to install Windows and then choose custom installation where you have to remove all partitions until you only have the two main partitions that correspond to the SSD (the largest) and the eMMC (the smallest) , instead I would choose to install Windows on the SSD, then select next and wait for the installation to finish. Once on the Windows desktop, without connecting the Wifi you still have to install the drivers, where it is advisable to do this step by enabling the installation of unsigned drivers in Windows, then run Double drives again and select the restore option.

Whatever method you use, try to do the process always with the charger connected.

Reply Support Not support

Use magic Report

mohawahba| Post time 11-29-2018 00:38:37 | Show all posts
is there anyway I can change the Fn Keys (swap) with functions keys?
Reply Support Not support

Use magic Report

mohawahba| Post time 7 day(s) ago | Show all posts
mohawahba replied at 11-29-2018 00:38
is there anyway I can change the Fn Keys (swap) with functions keys?

anyone can help on this topic?
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

12
Return to list
Quick Reply To Top Return to the list