ChuWi Forum»Forum General Discussion General Discussion Hi10 plus battery

Follow Us

Hi10 plus battery

[Copy link]

Bossboy|Post time:1-22-2019 01:29:20 View:107|Reply:2

Have opened back, checked voltage on battery cables it is 2.97 volts
Charger plugged in for hours, does not get warm
Check with voltstick, showing voltage through cable and tablet
Please please advise
Reply

Use magic Report

manonegra222| Post time 1-20-2019 13:18:15 | Show all posts
With that voltage the tablet will not be able to turn on. You should check if the charger works correctly or try another one. In case it is not a problem with the charger, you should plug it into the tablet and leave it for at least 10 hours waiting for the led to start blinking. Another solution is to disconnect the battery and charge it directly with a charger prepared to do this.
Reply Support Not support

Use magic Report

Bossboy| Post time 1-22-2019 01:29:20 | Show all posts
Hello,
I fully understand what you are telling me
Can you explain how I can connect battery when disconnected to a charger to see if ok, I have had on charge for a long time, but charger does not appear to get warm at all.
I have tested leads with voltstick, and there is a supply of electricity going to the tablet
I am desperate for help and advice please
Thankyou
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

Quick Reply To Top Return to the list