LapBook Pro (2019) SATA-3 - BIOS Update Request

Dear Support,

Can you please help me, LabBook Pro 8G/256 SSD was purchased, the crystal-mark disk test utility shows the SSD is working in SATA-2 mode, while mainboard and processor are supporting SATA-3. In current BIOS settings there is no way to switch on SATA-3.

Issue: Read-Write speed is ~100-200 Mb/s (depends on block size), which corresponds to SATA-2. System is capable to handle SATA-3.

**Request to Support: @Support ** I know there shall be LabBook Pro CHUWI official BIOS update, which is enabling SATA-3 by default, but I’m struggling to find it for download. Please advise?