[Vi8 Plus] [Official Version][Singleboot] Chuwi Vi8 Plus Windows 10, Bios, Driver Download

[Official Version][Singleboot] Chuwi Vi8 Plus Windows 10, Bios, Driver Download

Windows:
Chuwi Vi8 Plus windows 10 32 System:

Driver:
Chuwi Vi8 Plus Driver:

Tutorial:

Password:
en.chuwi.com

Hello, the link for the tutorial is not working, is it possible to have a tutoriel to install windows 10 ? the file are ok to download

Thanks
Xavier

http://www.mediafire.com/file/ag62nx4a1ms5qhn/vi8_plus_Windows_tutorial.docx/file

Salve, come si fa a reinstallare tutti driver?
Qualcuno mi può aiutare? Grazie

您好!我的VI8超級版因為升級了WIN10之後觸控一直不正常,後來改了BIOS設定後,現在連鍵盤滑鼠都沒法使用,想問有沒有其它方式可以重置BIOS?

How to set the BIOS to start the USB installation device?

After turning on continuously click F7 on the keyboard to enter in “boot select” menu and choose usb drive.

I don’t know how to set
Cannot use keyboard and USB device before entering the system
This problem has troubled me for several days

Try to disable windows boot manager in “boot” tab.
Also you can boot from Windows. Go to settings->recovery->advanced startup->restart now. From this menu you can choose usb device.

Does this mean that the Windows Boot Manager is disabled in the “Startup” tab?

This is how it was originally set

No, probably in “EFI” you can find it.
Also try to reset bios to default settings, maybe after that you can use usb keyboard.

I tried to reset the BIOS to default settings

image

But this is useless

未命名

Where should I set up EFI? ↓↓↓↓↓↓↓
1.


2.
image
3.
image
4.
image
5.
image

In this section, you will most likely find boot devices such as windows boot manager and usb
Untitled

And check this section, “usb controller” must be enabled.
Untitled

Later, I reinstalled the wrong version of win-64bit with the built-in memory card
This screen appears at startup


Because there is no otg relationship
Now only android4.4 can be used on this machine
More sadly, there is still no otg in the Android system
Is there any other way?

If usb configuration the same as shown, contact service@chuwi.com
image

Later, I removed the battery and left it for one night, and successfully installed win8.1
But the touch is still not normal
The KMF HID Minidriver for Touch 12C Device driver on the official website is also abnormal

Because singleboot version of this tablet has touch drivers only for windows 10.

After upgrading from win8.1 to win10, due to abnormal touch, install back to 8.1
As a result, the touch is still abnormal
Touch can only be used normally on Android system

If win10 is installed, is there a driver available?

Chuwi Vi8 Plus Driver:
https://chuwiinnovationtechnolog … 90nrzlux47q04cvwp56
You also can just install original windows 10, it has already installed drivers
Chuwi Vi8 Plus windows 10 32 System:
http://www.mediafire.com/folder/l8xuyj9onewfi/Vi8_Plus_single_system_Windows

Is there a dual system switch button in Chuwi Vi8 Plus Windows 10 32 system?