I am sorry to hear that. Your only solution for this is to flash the official firmware. You need to ask @JOSHZ and @mrfury about how to flash the firmware and successfully boot up the device. They said the instructions in the zipped file of how to flash the firmware are not correct. I have neither flash the firmware nor use QFIL tool. So I cannot tell what’s wrong with the instructions.
Hope you will fix your device soon.
Hi my friend, the solution is to flash the file called “persist.img” using qfile that will fix the bootloop or "bricked " state If you need more help just write here. I had the same problem and I fixed it.
Good afternoon! Thanks for the answer! To begin with, I would like to return my tablet to working condition, at the moment it loads up to the inscription “Chuwi”, after which it hangs on a black screen. I would like a clear and CORRECT instruction on the tablet firmware.
Just follow the tutorial but after all steps completed put the tablet again in qloader mode again and go to tools then go to partition manager, in the next screen select ok, after that you will see a list of files, look for persist.img and right click and select load, now select the file persist.img it is in the folder of the firmware you downloaded. And after the file is loaded just close all and disconnect the tablet. And then just keep pressing the power button until tablet restart. Sorry for my bad english
I tried to do as you wrote and I succeeded!!! If I had known, I would have done it earlier. Thank you so much for your help, I’m glad that there are professionals in their field like you. I hope your answer will help other users of this tablet as well!!!