[Hi10 Pro] [Official Version] Chuwi Hi10 Pro Windows, Android, Bios, Driver, tutorial Download

Hi, im attempting to connect my Chuwi Hi10 pro to my PC with windows 10 and i get error 43, i have tried with two different type-C cables and i get the same error. Can you help me? Thanks

Capture

You don’t say if you want to connect the tablet from Windows or from Android to your Windows 10 PC,

1.To connect it from Android you need to install the necessary drivers on the PC to recognize the storage of the tablet. You can only see the files hosted on the tablet as images, music and documents.
2. If it is from Windows it is not possible how you want to do it since it is the same as if you connect two computers via a USB cable. You will have to configure a network and connect the two computers to the network and give file sharing permissions.

Sorry, i want to connect my tablet in fastboot mode in order to flash android. Thanks

Turn on the tablet and in the dual menu choose Android and immediately press the power and volume + button, holding down the volume + button until a screen with dnx fast mode comes out

The problem is that i don’t have an android partition because i replaced all my disk by Ubuntu, so when i press the Android logo i show that and the tablet immediately power off. The message that shows is: System Bootorder Not found. Initializing defaults. Reset System.

Hello to all. I have flashed the above firmware on my tablet but it doesn’t work. I want to highlight that this is the right firmware:
2. The serial number of the begin with HQ64 (Hi10 HQ64G42170100001-Hi10 HQ64G42170300000)**
Android:
Hi10 Pro (H) Z8350CPU Android Download:
http://www.mediafire.com/folder/ls80apdw8b6u9/Hi10H_Q64G4217010001
Thanks to all.

1 Like

Hi. I need the bios and flash manual for Hi10 HQ64G42171001366.

Please describe your proble to service@chuwi.com .

I have a chuwi hi 10 pro sn: HQ64G42170104240
is there any way to install an android more modern than version 5?
thanks

This link does not work for me. Is there another for 1701?

Hi! could you send me the touch screen files from your backup? I would really appreciate it :slight_smile: b32jagaj@gmail.com

Hi, the touch screen does not work in my tablet (HQ64G42180101225), I installed the driver included inside the drivers file provided and the screen moves like crazy, it is unusable in this state. Could anyone provide me with a backup from that driver?

Abodroc,

  • My Hi10Pro has a Camera sensor unicam gc2355 but the Chuwi download wrongly contains the driver for an ov2680 instead. This linked file is the Camera Sensor Unicam gc2355 Windows driver and I installed it by right-clicking on the .inf file and selecting Install.
  • On receipt, my Hi10 Pro had the SileadTouch driver v17 [which works] but the Chuwi download has v10 [which does not work]. This linked file is the SileadTouch v17.18.16.457 Windows driver and I installed it by right-clicking on the .inf file and selecting Install.

By using the combination of the Chuwi download & the downloads I have posted, all my Chuwi Hi10 Pro hardware works. I’m currently on Windows 10 Home Ver 1909 [x64].

If you want to know how to backup your drivers then look in Backup and Restore Device Drivers - TenForumsTutorials and post any further questions there. {In any further questions, include @Try3 in the text so that I get told of your question.}

Here is a diagram listing all my drivers.

  • If I have not added an explanatory note, the driver concerned was included in the Chuwi download.
  • The SwitchNow utility is sometimes needed to switch off the OS choice at boot even though Android is no longer on my system. If I had foreseen the need for it I could have just copied it from the original installation but I actually got it from MediaFire

Denis

1 Like

Hello, I have a Chuwi Hi10 Pro PQ64G42160801857 with the famous sdcard issue. Is there a way to fix this? Some people say it’s possible, some people say it’s not. I’m really starting to run low on storage and I need both Android and Windows…

hello, I have the same problem I believe with my chuwi hi10 pro I posted on this forum I wanted to format until I read your exchanges. Please can you tell me where to find it in the SileadTouch device manager?
thank you in advance

I am not sure what you mean. My previous post included a link to the SileadTouch driver that worked in my Hi10Pro.

“•On receipt, my Hi10 Pro had the SileadTouch driver v17 [which works] but the Chuwi download has v10 [which does not work]. This linked file** is the SileadTouch v17.18.16.457 Windows driver and I installed it by right-clicking on the .inf file and selecting Install.”
** https://1drv.ms/u/s!AGByMtOTDnr1lEo

Denis

199/5000

Hello Denis thank you my touchscreen under windows does not work. I have tried everything I cannot install the drivers The rotation works and the touchscreen at startup and under android works

What do you mean by
1 “I cannot install the drivers”
2 “the touchscreen at startup … works”
and
3 Are there any warning icons in Device manager, any ‘Other devices’ or any ‘Unknown devices’? [expand each section to see - I’ve enclosed a sample from another computer]
Device manager warning signs-icons and Other devices

Denis

Hi you seem to have a large knowledge of the Hi10 Pro can you help me out with this question my Model number HQ64G42170700632 can anyone tell me if the correct software to use is under the The serial number for HQ64G421707 as the files say HQ64G42170705940.

Many Thanks
Stephen

You’ll have to ask Chuwi.
aftersale-service@chuwi.com

Denis