Dear developers of rzbox. Create a normal cooling system. I and probably many others will buy it. Currently, the cooling system is just terrible. The CPU temperature soars to 100 instantly.
Hello
Thank you very much for your advice. We will seriously consider it.
Thank you for your letter and wish you a happy life.
3 Likes
Nice initiative , please consider to give to already existing RZBox customers for a discounted rate and include two fans for new RZbox models instead of one
1 Like
I vote for this too!!!
Does not matter how many fans there are, as long as CPU temps donāt go over 70C at full load. Currently 80 is reached in less than a second and reaches 100+ without much efforts. 
Please @ChuwiService , pleaseā¦ you will sell a lot of these boxes with a better cooling, I promise!
Thank you
1 Like
dear RZBOX developers . why did you turn the heat pipe back to the power circuits? I took it apart and was surprised.it was just necessary to bring the heat pipe to the radiator ribs.this would be enough for efficient cooling.
2 Likes
@Toxez Do you mean you fixed the cooling issue or you just looked inside?
Now it looks like this. But in all laptops that Iāve seen and even video cards it looks like this.
this is for example, but the point is to put a heat pipe on the radiator ribs
And yes - alas, I donāt have the tools and equipment to fix it at home. so I just took it apart and looked.
3 Likes
Yes!!! I too join the request for a better aftermarket cooler! I buy it for sure if you make it!
3 Likes
I agree to this request.
I am waiting for rzbox
Thenā¦chuwi can already change fan and ship for new clientsā¦
3 Likes
The fins youāre looking for are under the black shroud.
There arenāt enough of them and they could have gone much larger.
That single heat pipe is the problem. My gen 4 nvme ssd has a cooler on it with two!
Iāve been watching it for about a week or so and Iāve tried quite a few things. Not much luck with that existing cooler.
What Iām seeing is that 3-4 of the cores get MUCH hotter than the other 4, the gpu, the encode/decode engine, and the package and socket sensors. At first. And then the entire thing warms up, but Iāve had a hard time getting the GPU to the danger zone temp wise.
The GPU is aside from the main cpu. And the cpu cores are divided into two sets of four cores. The gpu, cpu chonks, encode/decode are in different places on the die. The GPU is off to one side.
So Iād bet that heat pipe is hitting the gpu and one of the four core chiplets, but not the other. The heat isnāt being conducted well by the one heat pipe. Probably needs 3 or 4. Once that small cooler DOES absorb it,
Below is the cooler for the same 5800H with an nvidia 3060M gpu. Four heat pipes. Three to the cpu, out to TWO aluminum fin/fan blowers.
One blower would be fine, but this is inadequate. Not sure that was enough thermal paste either?
I have used a variety of positive and negative pressure on the case via an external usb 120mm fan. Firing one at low speed into the two top vents makes the overall temps a bit better and more balanced.
For now, Iām making it with the internal cooler, but any cpu intensive stuff that goes more than 3 minutes and the cpu is >100. I donāt really want it over 60-65.
If it annoys me enough, I may remove that cooler and install another cpu cooler with a larger chunk of metal, cut a little hole in the top lid to let the cooler/fan stick out, and Iāll have a computer with a hood scoop.
This system was clearly designed for something more like a 4600/5600G with 6 cores. Perhaps something even smaller.
As far as other options, we have undervolting, reducing the tdp, and other such tricks.
Reducing the TDP to 35W just hacks the gpu performance by about 75%. It still can manage putting up a 4k display, but the gaming and general graphics performance went out the window. Setting it to 25W gave me some interesting stuff where one of the two rj45 ethernet ports didnāt light up on boot. The one nearest the edge of the computer worked though. That kept the slashed gpu performance, and ate well into the cpu performance.
And since what we have are small points of heat generation that simple arenāt well connected to a heat pipe, copper base plate, or other meansā¦even undervolting brought me to an overheat on half of the cpu cores.
Undervolting, for those unfamiliar, is where you take the voltage supplied to the cpu/gpu and reduce it until the system loses stability. Different chips can work well on 85% or so of the voltage normally supplied to them. This works poorly on "APU"s from AMD, or Intel cpuās with integrated graphics. It works well on cpuās with a separate discrete graphics card.
Changing the fan curves around also does nothing, because those 4 cores still arenāt touching anything useful for quick heat transfer. Once the aluminum block becomes saturated from those four extra hot cores, game over.
I had watched the youtube video from ETAPRIME with great interest. Not for what he shows, but what he doesnāt. He tries to put the best face forward on products heās evaluating. He also takes things apart, pulls of coolers without a second thought, and fiddles with low level bios settings with impugnity.
He didnāt do any of that with this box. He pointed to where the fan curve settings are, mentioned that you can lower the TDP, and pointed at the cooler to say that it really should be larger. But he never took it off, showed how the lower TDP works out, and he seemed to move along pretty quickly after saying it wasnāt adequate.
Which having watched his videos for a while, means he tried those things and saw the very same downsides that Iāve covered in this experiment.
The computer still works for me and my usage model. Periodic bursts where I need a lot of cpu for a minute or two, and running a 4k display at 60-120Hz without the graphics end falling short. Itās small, makes no noise, and uses very little power for that.
In fact, Iād bet that they turned down the fan curve to as quiet as can be, because they figured out that blowing it at 100% when the unit overheats really doesnāt help for very long. Once any sensor on that cpu die (like the ones in those four cores) hits about 105C, the system will abruptly shut down. I got close enough to this with just a windows defender full scan on the C drive, so it may not be apparent that youāre ādoing anythingā at the time. The paste between the cooler and the cpu will dry out pretty quickly from this, resulting in even worse thermal transfer to the inadequate cooler, and the system either not starting at all, or starting and then shutting down quickly.
I expect to have to remove the cooler and clean/apply new paste to it every 2-3 years.
Thanks for coming to my TED talk! 
2 Likes
Nice topic. I second the āBring a new cooling systemā petition, I would do also with a cover that has holes on it in the appropriate places and size xD
I have the same issue. For my workload the cooling system relatively quickly reaches saturation and the CPU throttles or shuts down, itās a really bad situation.
I have recently bought a Chuwi RZBOX Ryzen 7 5800H and the mini PC is great and beautiful.
However, the heat sink is really bad and it is really easy to reach more then 100ĀŗC in the CPU. These temperatures are not acceptable and in the end components will fail in this environment.
I have removed the thermal paste, it has been replaced for one of really good quality and temperature has decreased 4 o 5 degrees, but still not enough.
It is a pitty to have so great processor and so bad cooling system.
I have been thinking to replace the heat sink but there is only 3 screws to anchor it and there is nothing in the maket with these features, so it should be something custom.
Please, create a decent system for RZBOX.
2 Likes
Anyknow knows another cooling mod?
I had to use 25tdp and disable boost to obtain decent temperatures. I also has change thermal paste two times and installed an external usb fan. The temps now are below 70Ā°C, but we need a proper CPU hestsink to enjoy the full potential of this PC.
PLEASE CHUWI DESIGN AND GIVE US A REAL CPU HEATSINK.
2 Likes
After your āserious considerationā what have you decided? It has been a while, so any news on the matter would be greatly appreciated. Iām sure you are focusing on the new AMDās APU processors, but the success of a company also relies on the support it gives to itās customers, so a bit of support on the āolderā models is a must.
If Chuwi has no intention of making an aftermarket cooler for the RZBOX 5800h, is there any other solution we can consider other than the ones already posted here?
Maybe a better cooler is used by another system that is compatible and therefore usable on the Chuwiās Rzbox?
Maybe someone has made a 3dprint project that can adapt a cpu cooler already on the market?
Thank you
1 Like
A bit extreme, but I respect that. Since the mounting has only 3 holes to screw the cooling which cooler and mounting system did you use?
Beside the question I posted to you before I forgot to ask what temperatures do you have now?
