same result, the touches are in one place and the result is in another point.
This fix my glitchy hi10 pro screen
I could not copy the files because of “SileadTouch.sys”, I always get the error that is not possible because the file is open, I tried to restart the computer and also delete through cmd, but I can not. how do i copy the files to the destination folder?
It is not about copying the files into the folder but installing it from the device manager.
Read how to do it in this thread: [TUTORIAL] How to remove Android and install Windows on a dualboot tablet (Intel Processors)
I know, the drivers you sent I installed and still continued with the wrong touch points, neimadVN sent a folder with a readme that had the files copied to system32/drivers …
try using “unlocker” app to delete the old file, then you can paste the new one there
I was able to replace the files and restarted the computer, but the touch is still noticeable elsewhere on the screen
The drivers touchscreen Hi10 Peo
gave the same result as the previous recommended, I made a short video showing how it happens. sorry for the low brightness of the recording.
Does auto rotation works? Try to rotate the tablet, when the image flip over, the sensor may start working normally. It helps sometimes.
auto rotation does not work and has no unknown driver not installed.
I think you should reinstall the accelerometer driver or reinstall Windows using the image from Chuwi (if you haven’t already)
Try out this stuff, I’m sure the cause is firmware because I faced this issue before
i need if a driver that works on a clean install of windows, i dont like to use a manufacturer iso, all my gadgets i take the manufacturer system.
And there is no reason why the driver does not work on a clean windows iso.
thank you very much to everyone who tried to help me, I will have to get used to this problem and always use the device with the keyboard.
Make sure to copy SileadTouch.sys to System32/Drivers. I tried this and it worked good but i coudnl’t click right click.
After the magicalpotato tip went back to work perfectly, thank you to everyone who tried to help me, and especially to magicalpotato.
I have posted the necessary Silead Touch driver in another thread. By using this, my Hi10Pro touch works correctly, including right-click [i.e. press & hold].
See my 9 Jan 2020 post in [Hi10 Pro] [Official Version] Chuwi Hi10 Pro Windows, Android, Bios, Driver, tutorial Download
Thank you so very much. This has been a problem for me for months. This fixed my touch screen driver perfectly.
Now that everything is correct and all devices work, make a copy of the drivers and keep them in case they change with any Windows update. Use the freely available doubledriver application on the internet