Кто установил проконсультируйте.Проверка моего дает результат больше чем SATA.
Это в режиме по nume
В режиме по умолчанию.
What is exactly the problem? Because i dont understand in which i can help you
chuwi gemibook plus n100 16go\ssd NVME M2 1.3 2280 (masquage intégré) TDP6W KPART512GBC2DVT-----------------------------------------------------------------------
CrystalDiskMark 6.0.0 x64 (C) 2007-2017 hiyohiyo
Crystal Dew World : https://crystalmark.info/
-
MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
-
KB = 1000 bytes, KiB = 1024 bytes
Sequential Read (Q= 32,T= 1) : 1754.610 MB/s
Sequential Write (Q= 32,T= 1) : 1708.903 MB/s
Random Read 4KiB (Q= 8,T= 8) : 1075.737 MB/s [ 262631.1 IOPS]
Random Write 4KiB (Q= 8,T= 8) : 681.931 MB/s [ 166487.1 IOPS]
Random Read 4KiB (Q= 32,T= 1) : 409.678 MB/s [ 100019.0 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 283.899 MB/s [ 69311.3 IOPS]
Random Read 4KiB (Q= 1,T= 1) : 46.608 MB/s [ 11378.9 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 120.453 MB/s [ 29407.5 IOPS]Test : 1024 MiB [C: 26.9% (127.8/475.8 GiB)] (x5) [Interval=5 sec]
Date : 2024/08/04 21:58:34
Могу я установить ssd nvme 7000 ?
Tell me your serial number, there has been some that are PCie and others that are Sata. I need to check which one is yours
В переписке все пишут что SSD формата Sata но замер скорости выдает данные что установлен NAMI с завода я хочу увеличить емкость до 1тб хочу узнать подойдет или нет KINGSPEC XG7000-1TB 1ТБ, M.2 2280, PCIe 4.0 x4, NVMe, M.2
Your laptop is PCIE GEn 3*2 . So try to have a memory that would be compatible with that
I have a GemiBook Plus N100 16GB/512GB. Ser: JGeBPLIY1H231204569. Which M.2 SSD is compatible with my machine?
The BIOS says, Select the PCIe M2 or CEMx4 slot. Does that mean it can handle x4 PCIe type slots?
Also I would like to know if I can insert an AI Accelerator in the m.2 slot with PCIe, such as the Edge type expansions, like Hailo-10H and others?
2280 SATA3/PCIE gen3*2
I dont think it can handle 4 Pcie because we have no computer with that yet.
For accelerator even our Tech dont know it, because they did not try it. If its not neccesary dont try it
I just got a SanDisk SN5000 Blue 4TB. Everything says it’s compatible with Gen3x2. How do I configure the Bios for this NVMe SSD?
The adaptor I used is a Gen2x1 Vantec Nexstar SX Nvme/SATA to USB C, and reads fine, so the SSD can function at the lowest levels just fine, as well as Gen4x4. Everything transferred in the clone, but it doesn’t recognize the drive when in the m.2 slot.
@manonegra222 you have GemiBook Plus you can check
Yes it is a Gemibook Plus, Ser#:JGeBPLIY1H231204569. And was told in previous replies that it can handle Pcie Gen32. The SanDisk SN5000 4TB, can handle Gen21, up to Gen4*4. I just need to know the BIOS settings to enable it to be recognized.
Another user said for the Gemibook Pro: “At BIOS go through points chipset → south bridge → pci → port 5 and change state to ‘enable’, then change ASPM to ‘disable’. I don’t know why active power management (ASPM) prevent PCIe SSD from initialyzing, but it is. I don’t remember exactly, but perhaps chipset point is in the advanced settings.”
Gemibook Plus has PCI port 7 and 9 set to PCIe SSD, on Gen3 and Gen4, respectively. I made a mistake of saying to them, I had a Pro, instead of Plus, if they are at all compatible.
I also heard from another user to set the speed slower, (as Gen4 was too fast), but I am not sure what speed setting they were talking about, as at least 2 exist.
Write to service@chuwi.com, they will contact Tech would be easier to help you