If you can’t enter the BIOS, then I think you may be stuck. Unless there’s a way of clearing the settings by unplugging the battery, or a jumper on the motherboard? There’s a picture in this forum somewhere of the motherboard of the HI10 XR, maybe that could provide an answer. I think it was @Biosham who has experience with taking these things apart?
I hope you get it sorted.
I try the link thus I saw some software but could not download them. It say they are deleted or move from the forum
You need to register first before you can download files from 4pda forum . You can try to reflash bios from bootable usb drive.
ok thank you very much. let me register
i try to register but the captcha words are not in English. please help register with this details
passcode u send to me please
I cannot read Russian too , forgot how i was able to register there. Maybe try register using 4pda android app ,
I think there’s a guide on how to register for non -Russian speaking people.
Have you tried using USB keyboard , with OTG or hub?
Connect usb keyboard to the data only port.
Connect charger to the charge port.
Press/hold Del key , then power button until the led blinks off and on .
Then repeatedly press the Del key.
Hope this will get you into the Bios setup.
i have chuwi Hi10x cw1529 window10. i did some settings on the bios now it refuse to bootup, it only show CHUWI under it https://www.chuwi.com/
, keyboard no longer work and USB port
As it was found out, most of the functions in the BIOS are stored in NVRAM memory and to reset the settings, you need to reflash the BIOS (using the programmer, if the usb devices can’t be detected), no combinations were found for resetting the BIOS.
If you are lucky and the settings that you changed are stored in CMOS, then try disconnecting the battery for 5-10 minutes, or discharge the tablet completely and let it lie off for ~ a day.
Ok I will disconnect the battery and let it lay for days. Cause I have try all I can even download all sort of software’s
Beautiful evening guys. The system remain the same and refuse to work
Most likely the only solution to the problem is to flash the bios with a programmer
Beautiful morning. Yes but I don’t no how to go about it. Any instructions on how to flash the bios
You will need a working PC, programmer + 1.8v adapter + adapter for flashing without unsoldering, a soldering iron if the adapter does not cope with its task.
The flashing is the same as for other Chuwi tablets, you will also need a suitable bios file.
Original bios has windows key, so it’s better to read the firmware before reflashing.
BIOS chip location
Or just take your tablet to any local service center.
Thank you I honestly appreciate your effort. I will get back to you
No one has been able to fix it
Shame on them:)
In EU countries or USA it is very difficult to find a good service.
I don’t even know what to advise you, Chuwi service will probably offer you to get the motherboard replaced.
You can look for repairmen who work at home and not in big services, they are usually better.
I have also a chuwi Hi10x cw1529 window10 and I have faced Exactlly the same problem as mentioned above. After the new update, my screen is not booted up in the right manner. Sometimes it’s stuck on the bootup screen. So I don’t know how to fix it, also called their technician for checking. But he didn’t give a suitable answer.
Hi everybody i have the same problem stuck on logo and no chance to enter bios setup i try to reprogram bios download *.bin file and i have ch341 programmer with low voltage attachment and when finish process didn’t lite up at all i find working the same model and copy the bios from it but the same stuck when i put from original chip *.bin light up to logo and that is the only thing i didn’t try is to program new chip and soldered and after i’m run out my ideas. If anybody reach better successes please let me know.
NECESITO ESTE BIOS POR FAVOR.
Fabricante: CHUWI Innovation And Technology (ShenZhen) co., Ltd
Nombre del producto: Hi10 X
Versión del producto: Cadena predeterminada
Versión de firmware: ZW-BI-101-S101GWR210-GH86B-068-E
SKU del sistema: Tablero de cadenas predeterminado
Tablero de cadenas predeterminado Nombre: cadena predeterminada